ИНСТРУМЕНТ 33 / 136

Roll Weight from Length Calculator — US Units

Roll Weight from Length connects the figures on a US supplier quote with the quantity used by your packaging operation. Have roll length (ft), web width (inch), film gsm (g/m²) ready before you start.

Ваши параметры

g/m²

При наличии используйте фактическую массу на м² от поставщика или по измерению.

Результаты обновляются при изменении данных. Расчёт сохраняется только по вашему выбору.
Расчёт в реальном времени

Масса плёнки в рулоне нетто

141,10 lb
Площадь плёнки8 611,13 ft²

Без втулки и всей внешней упаковки.

Net roll lb = Length(ft) × Width(in) ÷ 12 × GSM × 0.0002048161436

Roll length: 3280.839895013123 ft; Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → 141,10 lb

Рассчитано по вашим данным. Подтвердите параметры у поставщика.

Понятное объяснение формулы.

Net roll lb = Length(ft) × Width(in) ÷ 12 × GSM × 0.0002048161436

The result answers a specific purchasing question: Work out roll weight from length with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read net roll film weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Как пользоваться калькулятором

  1. 01

    Collect Roll length (ft); Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review net roll film weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Расчёт, который можно проверить

For this US purchasing example, enter roll length 3,280.84 ft, web width 31.50 inch, film gsm 80.00 g/m². The calculated net roll film weight is 141.10 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Длина рулона
3 280,8399 ft
Ширина полотна
31,496063 inch
Масса плёнки на м²
80 g/m²
Net roll lb = Length(ft) × Width(in) ÷ 12 × GSM × 0.0002048161436
Масса плёнки в рулоне нетто141,10 lb

Частые вопросы

Which units should I use for roll weight from length?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two roll weight from length results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record roll length (ft), web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.

Методика, единицы и допущения о материале ↗