Packaging Scrap Cost Calculator — US Units
Packaging Scrap Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have gross material consumed (lb), scrap rate (%), material price per lb (currency/lb) ready before you start.
Ваши параметры
Только обозначение валюты. Курс не пересчитывается.
Чистая стоимость материала отходов
Возвратная стоимость — введённая чистая сумма за килограмм отходов. Затраты на обработку или утилизацию автоматически не учитываются.
Net scrap cost = Gross consumed lb × Scrap fraction × (Material price/lb − Recovery credit/lb)
Gross material consumed: 2204.6226218487755 lb; Scrap rate: 5 %; Material price per kg: 1.3607771100000001 USD/lb; Scrap recovery value per kg: 0.136077711 USD/lb → US$135,00Рассчитано по вашим данным. Подтвердите параметры у поставщика.
Понятное объяснение формулы.
The result answers a specific purchasing question: Work out packaging scrap cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read net scrap material cost in your selected currency. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Как пользоваться калькулятором
- 01
Collect Gross material consumed (lb); Scrap rate (%); Material price per lb (currency/lb); Scrap recovery value per lb (currency/lb). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review net scrap material cost and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Расчёт, который можно проверить
For this US purchasing example, enter gross material consumed 2,204.62 lb, scrap rate 5.00 %, material price per lb US$1.3608/lb, scrap recovery value per lb US$0.1361/lb. The calculated net scrap material cost is US$135.00. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Валовой расход материала
- 2 204,62262 lb
- Доля отходов
- 5 %
- Material price per lb
- 1,36077711 USD/lb
- Scrap recovery value per lb
- 0,136077711 USD/lb
Net scrap cost = Gross consumed lb × Scrap fraction × (Material price/lb − Recovery credit/lb)Частые вопросы
Which units should I use for packaging scrap cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two packaging scrap cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record gross material consumed (lb), scrap rate (%), material price per lb (currency/lb), scrap recovery value per lb (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.
Методика, единицы и допущения о материале ↗