Tube Cost per 1,000 Calculator — US Units
Tube Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have tube body price per unit (currency/unit), cap per tube (currency/unit), additional decoration per tube (currency/unit) ready before you start.
Ваши параметры
Только обозначение единицы. Без конвертации валют.
Стоимость 1 000 туб
Вводите печать, декорирование, отделку или компоненты отдельно, только если они ещё не включены в базовое предложени��.
Оснастка — сумма, отнесённая на этот заказ; если она служит для нескольких заказов, используйте амортизацию за срок службы.
Стоимость 1 000 = 1 000 × (Туба + Крышка + Декор + Фиксированные затраты ÷ Количество)
Tube body price per unit: 0.2 USD/unit; Cap per tube: 0.04 USD/unit; Additional decoration per tube: 0.02 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD → US$285,00/1,000 tubesРассчитано по вашим данным. Подтвердите параметры у поставщика.
Понятное объяснение формулы.
The result answers a specific purchasing question: Work out tube cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 tubes in your selected currency/1,000 tubes. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Как пользоваться калькулятором
- 01
Collect Tube body price per unit (currency/unit); Cap per tube (currency/unit); Additional decoration per tube (currency/unit); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per 1,000 tubes and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Расчёт, который можно проверить
For this US purchasing example, enter tube body price per unit US$0.2000/unit, cap per tube US$0.04000/unit, additional decoration per tube US$0.02000/unit, order quantity 10,000.00 units. The calculated cost per 1,000 tubes is US$285.00/1,000 tubes. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Цена корпуса тубы за единицу
- 0,2 USD/шт.
- Колпачок на тубу
- 0,04 USD/шт.
- Дополнительное декорирование на тубу
- 0,02 USD/шт.
- Объём заказа
- 10 000 шт.
- Доставка этого заказа
- 250 USD
- Оснастка, отнесённая на этот заказ
- 0 USD
Cost/1,000 = 1,000 × (Tube + Cap + Decoration + Fixed charges ÷ Quantity)Частые вопросы
Which units should I use for tube cost per 1,000?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two tube cost per 1,000 results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record tube body price per unit (currency/unit), cap per tube (currency/unit), additional decoration per tube (currency/unit), order quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.
Методика, единицы и допущения о материале ↗