Check carton yield on inch-based sheet layouts

Compare both uniform orientations using usable sheet dimensions. Deduct known margins first, then verify grain, registration and die constraints with the converter.

Издатель: Nalyquo · ·

Иллюстративные расчёты; независимая экспертная проверка не заявляется. Обновление добавляет сведения о публикации и методике.

Методика и границы источниковРедакционная политика и исправления

Set up the US purchasing comparison

Compare both uniform orientations using usable sheet dimensions. Deduct known margins first, then verify grain, registration and die constraints with the converter.

Formula and worked US example

Uniform yield = max(floor(W/w) × floor(L/l), floor(W/l) × floor(L/w))

A 12 × 10-inch blank on a usable 40 × 30-inch sheet fits 3 × 3 = 9 in one orientation. Rotating all blanks gives 4 × 2 = 8. Nine is the better uniform rectangular estimate.

Checks before using the estimate

Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Частые вопросы

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.