Set up the US purchasing comparison
Identify whether the loss rate is a share of gross input or an allowance added to net output. Use the same boundary for startup scrap, trim and rejected production.
Formula and worked US example
Gross lb = Net good-output lb ÷ (1 − Gross-input loss fraction)
To obtain 950 lb of accepted output with 5% gross-input loss, buy 950 ÷ 0.95 = 1,000 lb. Waste is 50 lb. Adding 5% to 950 gives only 997.5 lb and falls short by 2.5 lb.
Checks before using the estimate
Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.
- Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
- Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.
Частые вопросы
Can I reproduce the US figures in a calculator?
Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.
What should I verify before using this result?
Use a qualified or explicitly assumed loss rate. Do not deduct the same rejected material in both the input quantity and the yield allowance.