Cost blister forming and lidding webs in square feet

Keep forming and lidding widths, basis weights and prices separate. Use full purchased web allocation per pack before applying retained-output yield.

نشر بواسطة Nalyquo · ·

حسابات توضيحية؛ لا يُدعى وجود مراجعة مختص مستقل. يضيف هذا التحديث معلومات النشر والمنهجية.

المنهج ونطاق المراجعالسياسة التحريرية والتصحيحات

Set up the US purchasing comparison

Keep forming and lidding widths, basis weights and prices separate. Use full purchased web allocation per pack before applying retained-output yield.

Formula and worked US example

Cost/good blister = Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × $/ft²) ÷ Yield

At a 12-inch width, 4-inch pitch and four packs across, each web allocates 0.083333 ft²/blister. If the two area prices total $0.024/ft², nominal material is $0.002/blister. With 5% loss, cost is about $2.1053 per thousand good blisters.

Checks before using the estimate

Retained part area omits the forming skeleton. Use the purchased web allocation and avoid counting the same skeleton loss twice.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

أسئلة شائعة

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Retained part area omits the forming skeleton. Use the purchased web allocation and avoid counting the same skeleton loss twice.