WERKZEUG 48 / 136

4-Ply Laminate GSM Calculator — US Units

4-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

4 Folien. 3 Klebstoffgrenzflächen.

Beispiel laden

Typische Dichte. Die tatsächliche Dichte hängt von Harztyp und Rezeptur ab; verwenden Sie nach Möglichkeit Lieferanten- oder Messdaten. Gemessene oder vom Lieferanten angegebene Grammatur ist meist verlässlicher als eine Dichteschätzung. Für eigene Materialien geprüfte Dichte eingeben. Papiergrammatur nicht aus einer allgemeinen Dichte schätzen.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
24,30g/m²

Estimated using typical Aluminiumfolie density of 2,70 g/cm³.

FILM LAYER 03
17,10g/m²

Estimated using typical PA6 / Nylon density of 1,14 g/cm³.

FILM LAYER 04
55,20g/m²

Estimated using typical PE (allgemein) density of 0,9200 g/cm³.

Klebstoff, Druck und Beschichtungen

Für ausgeschlossene Zusätze null eingeben. Alle Grammaturwerte sind verbleibende Trockenmasse je Quadratmeter. Klebstoff-, Farb- und Beschichtungsdicke werden nicht aus ihrer Grammatur abgeleitet.

Adhesive interface 1

Verbleibendes trockenes Auftragsgewicht

Adhesive interface 2

Verbleibendes trockenes Auftragsgewicht

Adhesive interface 3

Verbleibendes trockenes Auftragsgewicht

Druckfarbe

Verbleibende Trockenmasse

Beschichtung

Verbleibende Trockenmasse

Sonstiges verbleibendes Material

Verbleibende Trockenmasse

Gesamte Laminatgrammatur119,28g / m²
Folienschichten
113,28 g/m²
Klebstoff, Farbe, Beschichtung und Sonstiges
6,00 g/m²
Laminatergiebigkeit
40,93 ft²/lb
Nur Foliendicke
3,78 mil
Gewicht je 1.000 m²
262,97 lb
Massebeitrag jeder Schicht und jedes Zusatzes
Schicht oder ZusatzTrockengrammatur
1. PET / BOPET16,68
2. Aluminiumfolie24,30
3. PA6 / Nylon17,10
4. PE (allgemein)55,20
Adhesive interface 12,00
Adhesive interface 22,00
Adhesive interface 32,00
Druckfarbe · ausgeschlossen0,00
Beschichtung · ausgeschlossen0,00
Sonstiges verbleibendes Material · ausgeschlossen0,00
Gesamt119,28

Die Foliendicke schließt Klebstoff, Farbe und Beschichtung aus. Die Ergiebigkeit ist theoretisch, vor Prozessverlusten. Diese Schätzung verwendet typische Dichten aus der Materialbibliothek.

Formel und eingesetzte Werte

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²

Aluminiumfolie: 0,3543 mil × 25.4 × 2,70 = 24,30 g/m²

PA6 / Nylon: 0,5906 mil × 25.4 × 1,14 = 17,10 g/m²

PE (allgemein): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²

Total retained basis weight: 119,28 g/m²

Yield: 4,882.427636 ÷ 119,28 = 40,93 ft²/lb

Die Formel verständlich erklärt.

4-ply GSM = 25.4 × Σ(Four mil thicknesses × Their densities) + Dry retained additions

Build 4-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

So verwenden Sie diesen Rechner

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Eine überprüfbare Berechnung

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 4-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 3 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
93,76 g/m²
Coverage yield
52,08 ft²/lb
Material cost
US$0,03132/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Häufige Fragen

Which units should I use for 4-ply laminate gsm?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two 4-ply laminate gsm results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗