Film Thickness from GSM and Density Calculator — US Units
Film Thickness from GSM and Density connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), material density (g/cm³) ready before you start.
Ihre Spezifikationen
Verwenden Sie nach Möglichkeit das tatsächliche Flächengewicht des Lieferanten oder einen Messwert.
Typische Dichte. Die tatsächliche Dichte hängt von Harztyp und Rezeptur ab; verwenden Sie nach Möglichkeit Lieferanten- oder Messdaten.
Geschätzte Foliendicke
Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.
Eine einzige Dichte ist nur für homogenes Material oder eine bekannte effektive Dichte geeignet.
Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4
Film GSM: 16.68 g/m²; Material density: 1.39 g/cm³ → 0,4724 milAus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.
Die Formel verständlich erklärt.
The result answers a specific purchasing question: Work out film thickness from gsm and density with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film thickness in mil. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
So verwenden Sie diesen Rechner
- 01
Collect Film GSM (g/m²); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated film thickness and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Eine überprüfbare Berechnung
For this US purchasing example, enter film gsm 16.68 g/m², material density 1.39 g/cm³. The calculated estimated film thickness is 0.4724 mil. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Flächengewicht der Folie
- 16,68 g/m²
- Materialdichte
- 1,39 g/cm³
Equivalent thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4Häufige Fragen
Which units should I use for film thickness from gsm and density?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two film thickness from gsm and density results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.
Methode, Einheiten und Materialannahmen ↗