Folding Carton Material Cost per Unit Calculator — US Units
Folding Carton Material Cost per Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank area (ft²), board gsm (g/m²), board price on selected basis (currency/lb) ready before you start.
Ihre Spezifikationen
Nur Einheitenbezeichnung. Keine Währungsumrechnung.
Kosten je Faltschachtel
Der Preis je metrischer Tonne wird durch 1.000 geteilt, um den Preis/kg zu erhalten.
Nur Material; ohne Bogenverschnitt, Prozessverluste, Druck, Veredelung und Kleben.
Board cost/carton = Blank ft² × GSM × 0.0002048161436 × Price/lb
Actual blank area: 2.1527820833419447 ft²; Board GSM: 300 g/m²; Board price on selected basis: 0.544310844 USD/lb → US$0,07200/cartonAus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.
Die Formel verständlich erklärt.
The result answers a specific purchasing question: Work out folding carton material cost per unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per carton in your selected currency/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
So verwenden Sie diesen Rechner
- 01
Collect Actual blank area (ft²); Board GSM (g/m²); Board price on selected basis (currency/lb). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per carton and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Eine überprüfbare Berechnung
For this US purchasing example, enter actual blank area 2.15 ft², board gsm 300.00 g/m², board price on selected basis US$0.5443/lb. The calculated cost per carton is US$0.07200/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Tatsächliche Zuschnittfläche
- 2,15278208 ft²
- Kartonflächengewicht
- 300 g/m²
- Kartonpreis auf gewählter Basis
- 0,544310844 USD/lb
Board cost/carton = Blank ft² × GSM × 0.0002048161436 × Price/lbHäufige Fragen
Which units should I use for folding carton material cost per unit?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two folding carton material cost per unit results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank area (ft²), board gsm (g/m²), board price on selected basis (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.
Methode, Einheiten und Materialannahmen ↗