WERKZEUG 56 / 136

Pouch Weight Calculator — US Units

Pouch Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

Ihre Spezifikationen

lanes
g/m²

Verwenden Sie nach Möglichkeit das tatsächliche Flächengewicht des Lieferanten oder einen Messwert.

Ergebnisse werden beim Bearbeiten aktualisiert. Gespeichert wird erst auf Ihre Anweisung.
Laufende Berechnung

Foliengewicht je Produktionseinheit

0,0176 lb/pouch
Folienfläche je Beutel1,08 ft²/pouch
Nominalgewicht je 1.000 Beutel17,64 lb/1,000 pouches

Die Produktionsbahnumlage umfasst Material innerhalb der eingegebenen Bahn und des Rapports. Reißverschlüsse, Ventile und andere separate Teile sind ausgeschlossen.

Web method: lb/pack = Width(in) × Repeat(in) ÷ (144 × Lanes) × GSM × 0.0002048161436; Flat estimate: lb/pack = Width(in) × Height(in) × Faces ÷ 144 × GSM × 0.0002048161436

Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m² → 0,0176 lb/pouch

Aus Ihren Eingaben berechnet. Bestätigen Sie die Spezifikationen mit Ihrem Lieferanten.

Die Formel verständlich erklärt.

Web method: lb/pack = Width(in) × Repeat(in) ÷ (144 × Lanes) × GSM × 0.0002048161436; Flat estimate: lb/pack = Width(in) × Height(in) × Faces ÷ 144 × GSM × 0.0002048161436

The result answers a specific purchasing question: Work out pouch weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read film weight per production unit in lb/pouch. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

So verwenden Sie diesen Rechner

  1. 01

    Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Finished pouch width (inch); Finished pouch height (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review film weight per production unit and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Eine überprüfbare Berechnung

For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated film weight per production unit is 0.0176 lb/pouch. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Bahnbreite
31,496063 inch
Druck- / Verpackungsrapport
9,84251969 inch
Bahnen nebeneinander
2 lanes
Flächengewicht der Folie
80 g/m²
Web method: lb/pack = Width(in) × Repeat(in) ÷ (144 × Lanes) × GSM × 0.0002048161436; Flat estimate: lb/pack = Width(in) × Height(in) × Faces ÷ 144 × GSM × 0.0002048161436
Foliengewicht je Produktionseinheit0,0176 lb/pouch

Häufige Fragen

Which units should I use for pouch weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two pouch weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), finished pouch width (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Prüfen Sie die angezeigte Formel, die Einheiten und die Annahmen, bevor Sie das Ergebnis verwenden.

Methode, Einheiten und Materialannahmen ↗