3-Ply Laminate GSM Calculator — US Units
3-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
3 películas. 2 interfaces adhesivas.
Densidad típica. La densidad real varía según el grado y la formulación de la resina; utilice datos del proveedor o medidos cuando estén disponibles. El gramaje medido o del proveedor suele ser más fiable que una estimación por densidad. Para materiales personalizados, introduzca una densidad verificada. No use densidad genérica para estimar el gramaje del papel.
Adhesivo, impresión y recubrimientos
Introduzca cero para excluir una adición. Todos los gramajes son masa seca retenida por metro cuadrado. El espesor de adhesivo, tinta y recubrimiento no se deduce de su gramaje.
Gramaje seco retenido de recubrimiento
Gramaje seco retenido de recubrimiento
Masa seca retenida
Masa seca retenida
Masa seca retenida
- Capas de película
- 96,18 g/m²
- Adhesivo, tinta, recubrimiento y otros
- 4,00 g/m²
- Rendimiento del laminado
- 48,74 ft²/lb
- Solo espesor de película
- 3,19 mil
- Peso por 1.000 m²
- 220,86 lb
| Capa o adición | Gramaje seco |
|---|---|
| 1. PET / BOPET | 16,68 |
| 2. Papel de aluminio | 24,30 |
| 3. PE (genérico) | 55,20 |
| Adhesive interface 1 | 2,00 |
| Adhesive interface 2 | 2,00 |
| Tinta · excluido | 0,00 |
| Recubrimiento · excluido | 0,00 |
| Otro material retenido · excluido | 0,00 |
| Total | 100,18 |
El espesor de película excluye adhesivo, tinta y recubrimiento. El rendimiento es teórico, antes de mermas. Esta estimación incluye densidades típicas de la biblioteca.
Fórmula y valores sustituidos
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²
Papel de aluminio: 0,3543 mil × 25.4 × 2,70 = 24,30 g/m²
PE (genérico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²
Total retained basis weight: 100,18 g/m²
Yield: 4,882.427636 ÷ 100,18 = 48,74 ft²/lb
La fórmula, explicada.
Build 3-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
Cómo usar esta calculadora
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
Un cálculo que puedes comprobar
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 3-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 2 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 68,39 g/m²
- Coverage yield
- 71,39 ft²/lb
- Material cost
- US$0,02329/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
Preguntas frecuentes
Which units should I use for 3-ply laminate gsm?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two 3-ply laminate gsm results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.
Método, unidades y supuestos del material ↗