HERRAMIENTA 120 / 136

Blister Material Cost per 1,000 Packs Calculator — US Units

Blister Material Cost per 1,000 Packs connects the figures on a US supplier quote with the quantity used by your packaging operation. Have forming web width (inch), forming machine pitch (inch), packs across (units) ready before you start.

Tus especificaciones

unidades
g/m²
USD/lb
g/m²
USD/lb
%

Solo etiqueta de unidad. Sin conversión de divisas.

Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Coste total de material por 1.000 envases conformes

US$10,53/1,000 packs
Coste de material de formado por 1.000US$7,3684/1,000 packs
Coste de material de sellado por 1.000US$3,1579/1,000 packs
Material bruto de formado por 1.0008,12 lb/1,000 packs
Material bruto de sellado por 1.0001,39 lb/1,000 packs

La merma es la fracción perdida de la entrada bruta. Necesidad bruta = producción conforme ÷ (1 − merma/100).

Formado y sellado usan sus propias asignaciones de banda y un número común de envases a lo ancho. Excluye transformación, producto y ensayos.

Solo cálculo de material y compra; no implica una conclusión de calidad médica o farmacéutica.

Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)

Forming web width: 11.811023622047244 inch; Forming machine pitch: 3.937007874015748 inch; Packs across: 3 units; Forming web GSM: 350 g/m²; Forming material price/kg: 0.90718474 USD/lb; Lidding web width: 11.811023622047244 inch; Lidding pitch: 3.937007874015748 inch; Lidding GSM: 60 g/m²; Lidding material price/kg: 2.2679618500000003 USD/lb; Process loss on gross input: 5 % → US$10,53/1,000 packs

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)

The result answers a specific purchasing question: Work out blister material cost per 1,000 packs with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read total material cost per 1,000 good packs in your selected currency/1,000 packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Forming web width (inch); Forming machine pitch (inch); Packs across (units); Forming web GSM (g/m²); Forming material price/lb (currency/lb); Lidding web width (inch); Lidding pitch (inch); Lidding GSM (g/m²); Lidding material price/lb (currency/lb); Process loss on gross input (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review total material cost per 1,000 good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter forming web width 11.81 inch, forming machine pitch 3.94 inch, packs across 3.00 units, forming web gsm 350.00 g/m². The calculated total material cost per 1,000 good packs is US$10.53/1,000 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Ancho de la banda de formado
11,8110236 inch
Paso de la máquina de formado
3,93700787 inch
Envases a lo ancho
3 unidades
Gramaje de la banda de formado
350 g/m²
Forming material price/lb
0,90718474 USD/lb
Ancho de la banda de sellado
11,8110236 inch
Paso de sellado
3,93700787 inch
Gramaje del material de sellado
60 g/m²
Lidding material price/lb
2,26796185 USD/lb
Pérdida sobre entrada bruta
5 %
Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)
Coste total de material por 1.000 envases conformesUS$10,53/1,000 packs

Preguntas frecuentes

Which units should I use for blister material cost per 1,000 packs?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two blister material cost per 1,000 packs results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record forming web width (inch), forming machine pitch (inch), packs across (units), forming web gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗