HERRAMIENTA 66 / 136

Corrugated Sheet Weight Calculator — US Units

Corrugated Sheet Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual board gsm (g/m²) ready before you start.

Tus especificaciones

g/m²
unidades
Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Peso por hoja

1,06 lb/sheet
Peso total de las hojas1058,22 lb
Superficie por hoja10,33 ft²

Use el gramaje real del cartón. El tipo de canal, ECT y BCT no determinan el gramaje.

Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436

Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual board GSM: 500 g/m²; Sheet quantity: 1000 units → 1,06 lb/sheet

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436

The result answers a specific purchasing question: Work out corrugated sheet weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read weight per sheet in lb/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Sheet width (inch); Sheet length (inch); Actual board GSM (g/m²); Sheet quantity (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review weight per sheet and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual board gsm 500.00 g/m², sheet quantity 1,000.00 units. The calculated weight per sheet is 1.06 lb/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Ancho de plancha
47,2440945 inch
Longitud de plancha
31,496063 inch
Gramaje real del cartón
500 g/m²
Cantidad de planchas
1000 unidades
Sheet lb = Length(in) × Width(in) ÷ 144 × Board GSM × 0.0002048161436
Peso por hoja1,06 lb/sheet

Preguntas frecuentes

Which units should I use for corrugated sheet weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated sheet weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual board gsm (g/m²), sheet quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗