HERRAMIENTA 31 / 136

Film Density from GSM and Thickness Calculator — US Units

Film Density from GSM and Thickness connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), film thickness (mil) ready before you start.

Tus especificaciones

g/m²

Usa el gramaje del proveedor o el medido, si está disponible.

Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Densidad aparente de la película

1,39 g/cm³

En estructuras multicapa es una media efectiva, no una identificación de grados de resina individuales.

El error de medición del espesor afecta directamente a la densidad calculada.

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

Film GSM: 16.68 g/m²; Film thickness: 0.47244094488188976 mil → 1,39 g/cm³

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)

The result answers a specific purchasing question: Work out film density from gsm and thickness with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read apparent film density in g/cm³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Film GSM (g/m²); Film thickness (mil). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review apparent film density and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter film gsm 16.68 g/m², film thickness 0.4724 mil. The calculated apparent film density is 1.39 g/cm³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Gramaje del film
16,68 g/m²
Espesor del film
0,472440945 mil
Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)
Densidad aparente de la película1,39 g/cm³

Preguntas frecuentes

Which units should I use for film density from gsm and thickness?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two film density from gsm and thickness results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗