HERRAMIENTA 20 / 136

GSM to mils Calculator — US Units

GSM to mils connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), material density (g/cm³) ready before you start.

Tus especificaciones

g/m²

Usa el gramaje del proveedor o el medido, si está disponible.

g/cm³

Densidad típica. La densidad real varía según el grado y la formulación de la resina; utilice datos del proveedor o medidos cuando estén disponibles.

Los resultados se actualizan al editar. No se guarda nada hasta que tú lo decidas.
Cálculo en tiempo real

Espesor estimado de la película

0,4724 mil
Espesor en mil0,4724 mil

Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.

Una sola densidad solo es adecuada para un material homogéneo o una densidad efectiva conocida.

Thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

Film GSM: 16.68 g/m²; Material density: 1.39 g/cm³ → 0,4724 mil

Calculado con tus datos. Confirma las especificaciones con tu proveedor.

La fórmula, explicada.

Thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4

The result answers a specific purchasing question: Work out gsm to mils with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film thickness in mil. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Cómo usar esta calculadora

  1. 01

    Collect Film GSM (g/m²); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated film thickness and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un cálculo que puedes comprobar

For this US purchasing example, enter film gsm 16.68 g/m², material density 1.39 g/cm³. The calculated estimated film thickness is 0.4724 mil. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Gramaje del film
16,68 g/m²
Densidad del material
1,39 g/cm³
Thickness(mil) = GSM ÷ Density(g/cm³) ÷ 25.4
Espesor estimado de la película0,4724 mil

Preguntas frecuentes

Which units should I use for gsm to mils?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two gsm to mils results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.

Método, unidades y supuestos del material ↗