Roll Weight from Length Calculator — US Units
Roll Weight from Length connects the figures on a US supplier quote with the quantity used by your packaging operation. Have roll length (ft), web width (inch), film gsm (g/m²) ready before you start.
Tus especificaciones
Usa el gramaje del proveedor o el medido, si está disponible.
Peso neto del film en la bobina
No incluye el mandril ni ningún embalaje exterior.
Net roll lb = Length(ft) × Width(in) ÷ 12 × GSM × 0.0002048161436
Roll length: 3280.839895013123 ft; Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → 141,10 lbCalculado con tus datos. Confirma las especificaciones con tu proveedor.
La fórmula, explicada.
The result answers a specific purchasing question: Work out roll weight from length with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read net roll film weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Cómo usar esta calculadora
- 01
Collect Roll length (ft); Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review net roll film weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un cálculo que puedes comprobar
For this US purchasing example, enter roll length 3,280.84 ft, web width 31.50 inch, film gsm 80.00 g/m². The calculated net roll film weight is 141.10 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Longitud de bobina
- 3280,8399 ft
- Ancho de banda
- 31,496063 inch
- Gramaje del film
- 80 g/m²
Net roll lb = Length(ft) × Width(in) ÷ 12 × GSM × 0.0002048161436Preguntas frecuentes
Which units should I use for roll weight from length?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two roll weight from length results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record roll length (ft), web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Comprueba la fórmula, las unidades y los supuestos mostrados antes de utilizar el resultado.
Método, unidades y supuestos del material ↗