OUTIL 111 / 136

Closure Landed Cost Calculator — US Units

Closure Landed Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units) ready before you start.

Vos spécifications

USD/unit
unités
USD
USD
USD
USD

Libellé d’unité uniquement. Aucune conversion de devise.

Les résultats s’actualisent pendant la saisie. Rien n’est enregistré sans votre choix.
Calcul en direct

Coût par fermeture

US$0,2250/closure
Coût pour 1 000 fermeturesUS$225,00/1,000 closure
Transport réparti par fermetureUS$0,02500/unité
Composants proposés par unitéUS$0,2000/unité
Tous les frais fixes de commande par unitéUS$0,02500/unité
Coût total rendu de la commandeUS$2 250,00

Les montants proposés et tous les frais utilisent la devise choisie sans conversion de change.

N’ajoutez pas à nouveau transport ou composants si le devis les inclut déjà. Les droits sont un montant monétaire saisi.

Coût rendu/fermeture = Prix proposé/unité + (Transport + Outillage + Autres frais fixes) ÷ Quantité commandée

Quoted closure / dispenser price: 0.2 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD; Customs / duty amount: 0 USD; Other fixed order charges: 0 USD → US$0,2250/closure

Calculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.

La formule expliquée.

Coût rendu/fermeture = Prix proposé/unité + (Transport + Outillage + Autres frais fixes) ÷ Quantité commandée

The result answers a specific purchasing question: Work out closure landed cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per closure in your selected currency/closure. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Comment utiliser ce calculateur

  1. 01

    Collect Quoted closure / dispenser price (currency/unit); Total material quote (currency); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency); Customs / duty amount (currency); Other fixed order charges (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per closure and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcul que vous pouvez vérifier

For this US purchasing example, enter quoted closure / dispenser price US$0.2000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per closure is US$0.2250/closure. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Prix proposé de la fermeture ou du distributeur
0,2 USD/unité
Quantité commandée
10 000 unités
Transport de cette commande
250 USD
Outillage affecté à cette commande
0 USD
Montant des droits de douane
0 USD
Autres frais fixes de commande
0 USD
Landed/closure = Quoted price/unit + (Freight + Tooling + Other fixed charges) ÷ Order quantity
Coût par fermetureUS$0,2250/closure

Questions fréquentes

Which units should I use for closure landed cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two closure landed cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units), freight for this order (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.

Méthode, unités et hypothèses sur les matériaux ↗