Core Weight Calculator — US Units
Core Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have core outside diameter (inch), core inside diameter (inch), core width (inch) ready before you start.
Vos spécifications
700 kg/m³ est une estimation illustrative pour le carton. Saisissez la masse volumique réelle du mandrin ; cette valeur n’est pas universelle.
Poids estimé du mandrin
La masse volumique par défaut est une estimation illustrative du carton, pas une spécification universelle. Saisissez la valeur réelle ou utilisez le poids mesuré du mandrin.
Suppose un cylindre creux uniforme ; exclut bouchons et embouts.
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)
Core outside diameter: 3.543307086614173 inch; Core inside diameter: 2.9921259842519685 inch; Core width: 31.496062992125985 inch; Core material density: 43.699572403301225 lb/ft³ → 2,25 lbCalculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.
La formule expliquée.
The result answers a specific purchasing question: Work out core weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated core weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Comment utiliser ce calculateur
- 01
Collect Core outside diameter (inch); Core inside diameter (inch); Core width (inch); Core material density (lb/ft³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated core weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcul que vous pouvez vérifier
For this US purchasing example, enter core outside diameter 3.54 inch, core inside diameter 2.99 inch, core width 31.50 inch, core material density 43.70 lb/ft³. The calculated estimated core weight is 2.25 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Diamètre extérieur du mandrin
- 3,54330709 inch
- Diamètre intérieur du mandrin
- 2,99212598 inch
- Largeur du mandrin
- 31,496063 inch
- Masse volumique du mandrin
- 43,6995724 lb/ft³
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)Questions fréquentes
Which units should I use for core weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two core weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record core outside diameter (inch), core inside diameter (inch), core width (inch), core material density (lb/ft³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.
Méthode, unités et hypothèses sur les matériaux ↗