OUTIL 70 / 136

Corrugated Box Material Cost Calculator — US Units

Corrugated Box Material Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.

Vos spécifications

g/m²
USD/lb
USD/unit

Libellé d’unité uniquement. Aucune conversion de devise.

Les résultats s’actualisent pendant la saisie. Rien n’est enregistré sans votre choix.
Calcul en direct

Coût du carton par flan

US$0,08000/blank
Coût du carton pour 1 000 caissesUS$80,00/1,000 boxes
Coût avec la transformation saisieUS$0,08000/box
Transformation comprise pour 1 000US$80,00/1,000 boxes

Utilise les dimensions réelles du flan. Les dimensions intérieures ou extérieures de l’emballage fini ne définissent pas un flan de découpe exact.

Impression, découpe et collage sont exclus sauf saisie explicite dans le champ de transformation supplémentaire. Aucune perte de procédé n’est incluse.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Board price on selected basis: 0.36287389600000003 USD/lb; Converting / printing / gluing per box: 0 USD/unit → US$0,08000/blank

Calculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.

La formule expliquée.

Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb

The result answers a specific purchasing question: Work out corrugated box material cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read board material cost per blank in your selected currency/blank. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

Comment utiliser ce calculateur

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Board price on selected basis (currency/lb); Converting / printing / gluing per box (currency/unit). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review board material cost per blank and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

Un calcul que vous pouvez vérifier

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², board price on selected basis US$0.3629/lb. The calculated board material cost per blank is US$0.08000/blank. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Largeur réelle du flan
19,6850394 inch
Longueur réelle du flan
15,7480315 inch
Grammage réel du carton
500 g/m²
Prix du carton sur la base choisie
0,362873896 USD/lb
Transformation / impression / collage par caisse
0 USD/unité
Blank cost = Area(ft²) × Price/ft²; Price/ft² = Board GSM × 0.0002048161436 × Price/lb
Coût du carton par flanUS$0,08000/blank

Questions fréquentes

Which units should I use for corrugated box material cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated box material cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), board price on selected basis (currency/lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.

Méthode, unités et hypothèses sur les matériaux ↗