Film Price per Roll Calculator — US Units
Film Price per Roll connects the figures on a US supplier quote with the quantity used by your packaging operation. Have net film weight (lb), film price per lb (currency/lb), film area (ft²) ready before you start.
Vos spécifications
Indication de devise uniquement. Aucune conversion.
Facultatif : permet de calculer le prix/m² à partir du poids net.
Valeur matière de la bobine
Saisissez le grammage ou la largeur et la longueur de la bobine pour calculer un prix équivalent/m².
Roll value = Net lb × Price/lb, or Area(ft²) × Price/ft²
Net film weight: 176.36980974790205 lb; Film price per kg: 1.3607771100000001 USD/lb; Film GSM: g/m²; Web width: inch; Roll length: ft → US$240,00/bobineCalculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.
La formule expliquée.
The result answers a specific purchasing question: Work out film price per roll with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read roll material value in your selected currency/roll. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Comment utiliser ce calculateur
- 01
Collect Net film weight (lb); Film price per lb (currency/lb); Film area (ft²); Film price per ft² (currency/ft²); Film GSM (g/m²); Web width (inch); Roll length (ft). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review roll material value and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcul que vous pouvez vérifier
For this US purchasing example, enter net film weight 176.37 lb, film price per lb US$1.3608/lb, film gsm 0.00 g/m², web width 0.00 inch. The calculated roll material value is US$240.00/roll. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Masse nette du film
- 176,36981 lb
- Film price per lb
- 1,36077711 USD/lb
- Grammage du film
- g/m²
- Largeur de bande
- inch
- Longueur de bobine
- ft
Roll value = Net lb × Price/lb, or Area(ft²) × Price/ft²Questions fréquentes
Which units should I use for film price per roll?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two film price per roll results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record net film weight (lb), film price per lb (currency/lb), film area (ft²), film price per ft² (currency/ft²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.
Méthode, unités et hypothèses sur les matériaux ↗