Thermoformed Tray Cost per 1,000 Calculator — US Units
Thermoformed Tray Cost per 1,000 connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%) ready before you start.
Vos spécifications
Libellé d’unité uniquement. Aucune conversion de devise.
Coût pour 1 000 barquettes
La perte est une fraction de l’apport brut. Besoin brut = production conforme ÷ (1 − perte/100).
Les crédits de rebut ou compensations de broyat interne ne sont pas déduits automatiquement. Le coût de transformation est inclus uniquement selon la saisie.
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lb
Actual finished tray weight: 0.044092452436975516 lb; Resin price per kg: 0.6803885550000001 USD/lb; Process loss on gross input: 5 %; Conversion cost per good tray: 0.02 USD/unit; Good trays in shipment: 10000 units; Freight for this order: 250 USD → US$76,58/1,000 traysCalculé à partir de vos données. Confirmez les spécifications avec votre fournisseur.
La formule expliquée.
The result answers a specific purchasing question: Work out thermoformed tray cost per 1,000 with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 trays in your selected currency/1,000 trays. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Comment utiliser ce calculateur
- 01
Collect Actual finished tray weight (lb); Resin price per lb (currency/lb); Process loss on gross input (%); Conversion cost per good tray (currency/unit); Good trays in shipment (units); Freight for this order (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per 1,000 trays and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Un calcul que vous pouvez vérifier
For this US purchasing example, enter actual finished tray weight 0.0441 lb, resin price per lb US$0.6804/lb, process loss on gross input 5.00 %, conversion cost per good tray US$0.02000/unit. The calculated cost per 1,000 trays is US$76.58/1,000 trays. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Masse réelle de barquette finie
- 0,0440924524 lb
- Resin price per lb
- 0,680388555 USD/lb
- Pertes sur l’entrée brute
- 5 %
- Coût de transformation par barquette conforme
- 0,02 USD/unité
- Barquettes conformes expédiées
- 10 000 unités
- Transport de cette commande
- 250 USD
Material/1,000 trays = Part weight(lb) × 1,000 ÷ (1 − Waste fraction) × Resin price/lbQuestions fréquentes
Which units should I use for thermoformed tray cost per 1,000?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two thermoformed tray cost per 1,000 results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual finished tray weight (lb), resin price per lb (currency/lb), process loss on gross input (%), conversion cost per good tray (currency/unit) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Vérifiez la formule, les unités et les hypothèses affichées avant d’utiliser le résultat.
Méthode, unités et hypothèses sur les matériaux ↗