Estimate corrugated sheet pounds from inch dimensions

Use measured sheet dimensions and the total board GSM for the supplied construction. Convert square inches to square feet before applying the GSM-to-pound area factor.

Publié par Nalyquo · ·

Calculs illustratifs ; aucune révision indépendante spécialisée revendiquée. Cette mise à jour ajoute des informations de publication et de méthode.

Méthode et portée des référencesPolitique éditoriale et corrections

Set up the US purchasing comparison

Use measured sheet dimensions and the total board GSM for the supplied construction. Convert square inches to square feet before applying the GSM-to-pound area factor.

Formula and worked US example

Sheet lb = Length(in) × Width(in) ÷ 144 × GSM × 0.0002048161436

A 48 × 40-inch sheet has 13.3333 ft² of area. At 600 GSM its theoretical mass is about 1.6385 lb. One thousand sheets contain about 1,638.53 lb before wrapping and pallets.

Checks before using the estimate

Flute designation and strength ratings do not establish complete board GSM. Moisture, coating and manufacturing tolerances can change actual scale weight.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Questions courantes

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Flute designation and strength ratings do not establish complete board GSM. Moisture, coating and manufacturing tolerances can change actual scale weight.