टूल 77 / 136

Cartons per Sheet Calculator — US Units

Cartons per Sheet connects the figures on a US supplier quote with the quantity used by your packaging operation. Have sheet width (inch), sheet length (inch), actual blank width (inch) ready before you start.

आपके विनिर्देश

इनपुट बदलते ही परिणाम अपडेट होते हैं। आपके सहेजने का विकल्प चुनने तक कुछ भी सहेजा नहीं जाता।
तत्काल गणना

सबसे अच्छा साधारण आयताकार विन्यास

4.00 blanks/sheet
बिना घुमाए ब्लैंक का विन्यास4.00 blanks/sheet
ब्लैंक 90° घुमाया गया3.00 blanks/sheet
आयताकार क्षेत्रफल का उपयोग83.33 %

केवल दो समान आयताकार दिशाओं की तुलना करता है। बीच के अंतर, ग्रिपर मार्जिन, रेशे की दिशा की सीमाएँ और अनियमित डाई-लाइन नेस्टिंग शामिल नहीं हैं।

प्रति शीट कार्टन = नीचे पूर्णांक(शीट चौड़ाई ÷ ब्लैंक चौड़ाई) × नीचे पूर्णांक(शीट लंबाई ÷ ब्लैंक लंबाई)

Sheet width: 47.24409448818898 inch; Sheet length: 31.496062992125985 inch; Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch → 4.00 blanks/sheet

आपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।

सूत्र का स्पष्ट विवरण।

प्रति शीट कार्टन = नीचे पूर्णांक(शीट चौड़ाई ÷ ब्लैंक चौड़ाई) × नीचे पूर्णांक(शीट लंबाई ÷ ब्लैंक लंबाई)

The result answers a specific purchasing question: Work out cartons per sheet with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read best simple rectangular layout in blanks/sheet. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

इस कैलकुलेटर का उपयोग कैसे करें

  1. 01

    Collect Sheet width (inch); Sheet length (inch); Actual blank width (inch); Actual blank length (inch). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review best simple rectangular layout and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

ऐसी गणना जिसे आप जाँच सकते हैं

For this US purchasing example, enter sheet width 47.24 inch, sheet length 31.50 inch, actual blank width 19.69 inch, actual blank length 15.75 inch. The calculated best simple rectangular layout is 4.00 blanks/sheet. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

शीट की चौड़ाई
47.2440945 inch
शीट की लंबाई
31.496063 inch
ब्लैंक की वास्तविक चौड़ाई
19.6850394 inch
ब्लैंक की वास्तविक लंबाई
15.7480315 inch
Cartons/sheet = floor(Sheet width ÷ Blank width) × floor(Sheet length ÷ Blank length)
सबसे अच्छा साधारण आयताकार विन्यास4.00 blanks/sheet

अक्सर पूछे जाने वाले प्रश्न

Which units should I use for cartons per sheet?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two cartons per sheet results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record sheet width (inch), sheet length (inch), actual blank width (inch), actual blank length (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।

विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗