टूल 76 / 136

Folding Carton Weight Calculator — US Units

Folding Carton Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²) ready before you start.

आपके विनिर्देश

g/m²
%
इनपुट बदलते ही परिणाम अपडेट होते हैं। आपके सहेजने का विकल्प चुनने तक कुछ भी सहेजा नहीं जाता।
तत्काल गणना

कार्टन बोर्ड का अनुमानित वज़न

0.1323 lb/carton
आयताकार ब्लैंक का वास्तविक क्षेत्रफल2.15 ft²
कटआउट से पहले ब्लैंक का द्रव्यमान0.1323 lb
दर्ज कटआउट से हटाई गई सामग्री0.00 lb

वास्तविक ब्लैंक माप उपयोग करता है। तैयार पैकेज के आंतरिक या बाहरी माप से सटीक डाई-लाइन ब्लैंक तय नहीं होता।

कटआउट प्रतिशत इस ब्लैंक से हटाई सामग्री है, उत्पादन उपज की हानि नहीं। मापे जीएसएम में पहले से शामिल न हों तो चिपकाने वाला पदार्थ, स्याही और सहायक सामग्री शामिल नहीं हैं।

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual paperboard GSM: 300 g/m²; Blank area removed by cutouts: 0 % → 0.1323 lb/carton

आपके इनपुट से गणना की गई है। आपूर्तिकर्ता से विनिर्देशों की पुष्टि करें।

सूत्र का स्पष्ट विवरण।

Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)

The result answers a specific purchasing question: Work out folding carton weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated carton board weight in lb/carton. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

इस कैलकुलेटर का उपयोग कैसे करें

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual paperboard GSM (g/m²); Blank area removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated carton board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

ऐसी गणना जिसे आप जाँच सकते हैं

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual paperboard gsm 300.00 g/m², blank area removed by cutouts 0.00 %. The calculated estimated carton board weight is 0.1323 lb/carton. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

ब्लैंक की वास्तविक चौड़ाई
19.6850394 inch
ब्लैंक की वास्तविक लंबाई
15.7480315 inch
पेपरबोर्ड का वास्तविक ग्राम प्रति वर्ग मीटर भार
300 g/m²
कटआउट से हटने वाला ब्लैंक क्षेत्रफल
0 %
Retained board lb = Blank area(ft²) × GSM × 0.0002048161436 × (1 − Removal fraction)
कार्टन बोर्ड का अनुमानित वज़न0.1323 lb/carton

अक्सर पूछे जाने वाले प्रश्न

Which units should I use for folding carton weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two folding carton weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual paperboard gsm (g/m²), blank area removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

परिणाम का उपयोग करने से पहले दिखाई गई गणना का सूत्र, इकाइयाँ और मान्यताएँ जाँचें।

विधि, इकाइयाँ और सामग्री की मान्यताएँ ↗