Set up the US purchasing comparison
Compare both uniform orientations using usable sheet dimensions. Deduct known margins first, then verify grain, registration and die constraints with the converter.
Formula and worked US example
Uniform yield = max(floor(W/w) × floor(L/l), floor(W/l) × floor(L/w))
A 12 × 10-inch blank on a usable 40 × 30-inch sheet fits 3 × 3 = 9 in one orientation. Rotating all blanks gives 4 × 2 = 8. Nine is the better uniform rectangular estimate.
Checks before using the estimate
Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.
- Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
- Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.
सामान्य प्रश्न
Can I reproduce the US figures in a calculator?
Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.
What should I verify before using this result?
Mixed orientations and interlocking shapes can give other yields. The calculator does not replace production nesting or die design.