Count packs from roll feet, inch repeat and lanes

Measure the complete machine-direction repeat, including registration or gap where required. Count the finished pack positions across the actual web.

Pubblicato da Nalyquo · ·

Calcoli illustrativi; nessuna revisione specialistica indipendente dichiarata. Questo aggiornamento aggiunge informazioni editoriali e metodologiche.

Metodo e ambito dei riferimentiPolitica editoriale e correzioni

Set up the US purchasing comparison

Measure the complete machine-direction repeat, including registration or gap where required. Count the finished pack positions across the actual web.

Formula and worked US example

Good packs = Roll ft × 12 ÷ Repeat(in) × Lanes × Retained fraction

A 5,000-ft usable roll with a 10-inch repeat and two lanes provides 12,000 nominal pack positions. With 4% loss on that input, expected accepted output is 11,520 packs.

Checks before using the estimate

Use usable footage after separately excluded leaders and tails. A finished pack height is not automatically the machine repeat.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

Domande comuni

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use usable footage after separately excluded leaders and tails. A finished pack height is not automatically the machine repeat.