2-Ply Laminate GSM Calculator — US Units
2-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
フィルム2層、接着界面1か所。
代表的な密度です。実際の密度は樹脂グレードや配合によって異なります。入手できる場合は仕入先データや実測値を使用してください。 実測坪量や仕入先坪量は通常、密度からの推定より信頼できます。カスタム材には検証済み密度を入力し、紙の坪量を一般密度で推定しないでください。
接着剤・印刷・コーティング
除外する添加材は0にしてください。坪量入力はすべて1m²当たりの残留乾燥質量です。 接着剤、インク、コーティングの厚さは坪量から推定しません。
残留乾燥塗布量
残留乾燥質量
残留乾燥質量
残留乾燥質量
- フィルム層
- 71.88 g/m²
- 接着剤・インク・コーティング・その他
- 2.00 g/m²
- ラミネート歩留まり面積
- 66.09 ft²/lb
- フィルム厚さのみ
- 2.83 mil
- 1,000m²当たりの重量
- 162.88 lb
| 層・添加材 | 乾燥坪量 |
|---|---|
| 1. PET / BOPET | 16.68 |
| 2. PE(一般) | 55.20 |
| Adhesive interface 1 | 2.00 |
| インク ・対象外 | 0.00 |
| コーティング ・対象外 | 0.00 |
| その他の残留材料 ・対象外 | 0.00 |
| 合計 | 73.88 |
フィルム厚さは接着剤、インク、コーティングを除きます。歩留まり面積は工程ロス控除前の理論値です。 材料ライブラリの代表密度を含む推定です。
式と代入値
Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.
Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.
PET / BOPET: 0.4724 mil × 25.4 × 1.39 = 16.68 g/m²
PE(一般): 2.36 mil × 25.4 × 0.9200 = 55.20 g/m²
Total retained basis weight: 73.88 g/m²
Yield: 4,882.427636 ÷ 73.88 = 66.09 ft²/lb
計算式をわかりやすく。
Build 2-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
この計算ツールの使い方
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
検算できる計算例
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
This independent 2-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 1 PE layer at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.
- PET price
- $2/lb
- PE price
- $1.25/lb
- Wet adhesive
- $2/lb · 40% solids
- Total basis weight
- 43.02 g/m²
- Coverage yield
- 113.49 ft²/lb
- Material cost
- US$0.01526/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSMThese are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.
よくある質問
Which units should I use for 2-ply laminate gsm?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two 2-ply laminate gsm results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗