ツール 130 / 136

Bottle Cost per Usable Unit Calculator — US Units

Bottle Cost per Usable Unit connects the figures on a US supplier quote with the quantity used by your packaging operation. Have purchased bottles (units), quoted price per bottle (currency), order freight (currency) ready before you start.

仕様を入力

個
USD
USD
%

通貨の表示のみ。為替換算は行いません。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

想定使用��能ボトル1本当たりの原価

US$0.2296/個
想定使用可能ボトル数9,800.00 個
注文原価合計US$2,250.00

仕入先の値引き、交換、残存品売却収入は想定しません。

運賃は注文全体の金額です。ボトル装飾、キャップ、充填ロスは含みません。

想定使用可能数は検査結果を保証しません。

使用可能本数 = 購入数 × (1 − 不良率/100);有効単価 = (購入数 × 単価 + 運賃) ÷ 使用可能本数

Purchased bottles: 10000 units; Quoted price per bottle: 0.2 USD; Order freight: 250 USD; Expected rejected bottles: 2 % → US$0.2296/個

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

使用可能本数 = 購入数 × (1 − 不良率/100);有効単価 = (購入数 × 単価 + 運賃) ÷ 使用可能本数

The result answers a specific purchasing question: Work out bottle cost per usable unit with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per expected usable bottle in your selected currency/unit. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Purchased bottles (units); Quoted price per bottle (currency); Order freight (currency); Expected rejected bottles (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per expected usable bottle and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter purchased bottles 10,000.00 units, quoted price per bottle US$0.2000, order freight US$250.00, expected rejected bottles 2.00 %. The calculated cost per expected usable bottle is US$0.2296/unit. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

購入ボトル数
10,000 個
ボトル1本当たりの見積価格
0.2 USD
注文の運賃
250 USD
想定不良ボトル数
2 %
Usable bottles = Purchased × (1 − Rejection/100); Usable unit cost = (Purchased × Price + Freight) ÷ Usable bottles
想定使用��能ボトル1本当たりの原価US$0.2296/個

よくある質問

Which units should I use for bottle cost per usable unit?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two bottle cost per usable unit results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record purchased bottles (units), quoted price per bottle (currency), order freight (currency), expected rejected bottles (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗