ツール 42 / 136

Core Weight Calculator — US Units

Core Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have core outside diameter (inch), core inside diameter (inch), core width (inch) ready before you start.

仕様を入力

lb/ft³

700kg/m³は板紙の例示用推定値です。汎用値ではないため、実際のコア密度を入力してください。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

推定コア重量

2.25 lb
コア壁の体積0.0516 ft³

初期密度は板紙の例示用推定値であり、共通仕様ではありません。実際の密度かコアの実測重量を使用してください。

均一な中空円筒を前提とし、プラグや端部金具を含みません。

Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)

Core outside diameter: 3.543307086614173 inch; Core inside diameter: 2.9921259842519685 inch; Core width: 31.496062992125985 inch; Core material density: 43.699572403301225 lb/ft³ → 2.25 lb

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)

The result answers a specific purchasing question: Work out core weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated core weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Core outside diameter (inch); Core inside diameter (inch); Core width (inch); Core material density (lb/ft³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated core weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter core outside diameter 3.54 inch, core inside diameter 2.99 inch, core width 31.50 inch, core material density 43.70 lb/ft³. The calculated estimated core weight is 2.25 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

コア外径
3.54330709 inch
コア内径
2.99212598 inch
コア幅
31.496063 inch
コア材料密度
43.6995724 lb/ft³
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)
推定コア重量2.25 lb

よくある質問

Which units should I use for core weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two core weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record core outside diameter (inch), core inside diameter (inch), core width (inch), core material density (lb/ft³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗