Boxes per Pallet Layer Calculator — US Units
Boxes per Pallet Layer connects the figures on a US supplier quote with the quantity used by your packaging operation. Have usable pallet length (inch), usable pallet width (inch), outside box length (inch) ready before you start.
仕様を入力
1段当たりの箱数
同一方向のみです。混合配置では箱数が増える場合があります。
有効設置面積から差し引いていない限り、はみ出し、隙間、巻き付け余裕は含みません。
積み重ね高さ、安定性、圧縮強度、パレット耐荷重は評価しません。
段当たり個数 = max(floor(L/l) × floor(W/w), floor(L/w) × floor(W/l))
Usable pallet length: 47.24409448818898 inch; Usable pallet width: 31.496062992125985 inch; Outside box length: 15.748031496062993 inch; Outside box width: 11.811023622047244 inch → 8.00 個入力値に基づく計算です。仕様は仕入先に確認してください。
計算式をわかりやすく。
The result answers a specific purchasing question: Work out boxes per pallet layer with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read boxes per layer in units. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
この計算ツールの使い方
- 01
Collect Usable pallet length (inch); Usable pallet width (inch); Outside box length (inch); Outside box width (inch). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review boxes per layer and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
検算できる計算例
For this US purchasing example, enter usable pallet length 47.24 inch, usable pallet width 31.50 inch, outside box length 15.75 inch, outside box width 11.81 inch. The calculated boxes per layer is 8.00 units. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- パレットの有効長さ
- 47.2440945 inch
- パレットの有効幅
- 31.496063 inch
- 箱の外寸長さ
- 15.7480315 inch
- 箱の外寸幅
- 11.8110236 inch
Layer count = max(floor(L/l) × floor(W/w), floor(L/w) × floor(W/l))よくある質問
Which units should I use for boxes per pallet layer?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two boxes per pallet layer results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record usable pallet length (inch), usable pallet width (inch), outside box length (inch), outside box width (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗