ツール 73 / 136

Corrugated Cost per 1,000 Boxes Calculator — US Units

Corrugated Cost per 1,000 Boxes connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted price per box (currency/unit), quoted price per sheet (currency), boxes per sheet (units) ready before you start.

仕様を入力

USD/unit
個
USD
USD

単位表示のみです。為替換算は行いません。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

箱1,000個当たりの原価

US$525.00/1,000 boxes
箱の合計原価US$0.5250/boxes
1,000個当たりの材料・加工費US$500.00/1,000 boxes
1,000個当たりの金型・版代配賦額US$0.00000/1,000 boxes
1,000個当たりの運賃配賦額US$25.00/1,000 boxes

箱の基本価格には、見積対象の材料と加工範囲が含まれる前提です。

1,000個の着地原価 = 1,000 ×(箱基本費用 + 型費 ÷ 注文数量 + 運賃 ÷ 注文数量)

Quoted price per box: 0.5 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD → US$525.00/1,000 boxes

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

1,000個の着地原価 = 1,000 ×(箱基本費用 + 型費 ÷ 注文数量 + 運賃 ÷ 注文数量)

The result answers a specific purchasing question: Work out corrugated cost per 1,000 boxes with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per 1,000 boxes in your selected currency/1,000 boxes. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Quoted price per box (currency/unit); Quoted price per sheet (currency); Boxes per sheet (units); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per 1,000 boxes and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter quoted price per box US$0.5000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per 1,000 boxes is US$525.00/1,000 boxes. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

箱あたりの見積価格
0.5 USD/個
発注数量
10,000 個
この注文の運賃
250 USD
この注文に配賦する金型費
0 USD
Landed/1,000 = 1,000 × (Base cost/box + Tooling ÷ Order quantity + Freight ÷ Order quantity)
箱1,000個当たりの原価US$525.00/1,000 boxes

よくある質問

Which units should I use for corrugated cost per 1,000 boxes?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated cost per 1,000 boxes results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted price per box (currency/unit), quoted price per sheet (currency), boxes per sheet (units), order quantity (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗