ツール 123 / 136

FIBC Bag Volume & Dimensions Calculator — US Units

FIBC Bag Volume & Dimensions connects the figures on a US supplier quote with the quantity used by your packaging operation. Have internal filled length (inch), internal filled width (inch), internal filling height (inch) ready before you start.

仕様を入力

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

理論内容積

34.33 ft³
理論内容積(L)256.78 US gal
必要な内側充填高さ47.24 inch

長方形の内部充填形状のみを対象とします。膨らみ、沈降、ライナー、縫い目、ヘッドスペースで有効容積が変わる場合があります。

容積と充填高さの推定であり、生地の裁断寸法や安全使用荷重ではありません。仕入先仕様は別途確認してください。

Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12

Internal filled length: 35.43307086614173 inch; Internal filled width: 35.43307086614173 inch; Internal filling height: 47.24409448818898 inch → 34.33 ft³

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12

The result answers a specific purchasing question: Work out fibc bag volume & dimensions with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read theoretical internal volume in ft³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Internal filled length (inch); Internal filled width (inch); Internal filling height (inch); Target product mass (lb); Product bulk density (lb/ft³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review theoretical internal volume and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter internal filled length 35.43 inch, internal filled width 35.43 inch, internal filling height 47.24 inch. The calculated theoretical internal volume is 34.33 ft³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

充填部の内側長さ
35.4330709 inch
充填部の内側幅
35.4330709 inch
内側の充填高さ
47.2440945 inch
Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12
理論内容積34.33 ft³

よくある質問

Which units should I use for fibc bag volume & dimensions?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two fibc bag volume & dimensions results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record internal filled length (inch), internal filled width (inch), internal filling height (inch), target product mass (lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗