Flexible Packaging Quote Comparison Calculator — US Units
Flexible Packaging Quote Comparison connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.
見積りを同じ基準にそろえる。
入手可能なら実際の仕入先坪量を入力してください。不明寸法は空欄にすると、換算に必要な追加情報が表示されます。
需要・仕様許容差
年間支出は共通需要を満たす整数回の出荷購入額です。運賃は出荷ごと、金型費は初年度に1回計上し、余剰在庫も含みます。MOQは最小制約で、出荷量の仮定ではありません。工程ロス、関税、税、支払条件、在庫保有費は含みません。
仕様許容差を編集
絶対許容差は入力の最大値と最小値を比較します。列数は完全一致が必要です。構成確認は大小文字と重複スペースのみを無視し、材質の同等性は解釈しません。
最小計算原価≠同等仕様
入力欄は設定許容差内で一致していますが、同等仕様とは断定できません。バリア性、シール性、機械特性、承認は別途確認が必要です。
| 比較基準 | Supplier AUSD | Supplier BUSD |
|---|---|---|
| 見積基準 | lb | ft² |
| 見積価格 | US$1.4515/lb | US$0.02127/ft² |
| 構成 | PET12/PE60+接着剤2g/m² | PET12/PE60+接着剤2g/m² |
| 坪量 | 73.88 g/m² | 73.88 g/m² |
| 合計厚さ | 2.83 mil | 2.83 mil |
| ウェブ幅 | 31.50 inch | 31.50 inch |
| リピート/列数 | 9.84 inch / 2 | 9.84 inch / 2 |
| 最小発注量 | 1,102.31 lb | 1,102.31 lb |
| 納品あたりの数量 | 2,204.62 lb | 2,204.62 lb |
| 運賃/出荷 | US$250.00 | US$350.00 |
| 初回の金型・版代 | US$600.00 | US$900.00 |
| Material cost / lb | US$1.4515/lb | US$1.4060/lb最小計算原価 |
| Material cost / ft² | US$0.02196/ft² | US$0.02127/ft²最小計算原価 |
| Material cost / linear foot | US$0.05765/ft | US$0.05584/ft最小計算原価 |
| 材料原価/1,000個 | US$23.64 | US$22.90最小計算原価 |
| First-shipment landed / lb | US$1.8370/lb最小計算原価 | US$1.9730/lb |
| First-shipment landed / ft² | US$0.02780/ft²最小計算原価 | US$0.02985/ft² |
| 出荷材料小計 | US$3,200.00 | US$3,099.62 |
| 初回出荷の着荷原価合計 | US$4,050.00 | US$4,349.62 |
| 初年度の年間支出 | US$28,200.00 | US$28,496.97 |
| 年間の完全出荷回数 | 8 | 8 |
| Annual purchased 1,000 units | 1,082.84 | 1,082.84 |
初回着荷原価は入力金型費全額を含み、年間支出には1回だけ計上します。1,000個単価は入力リピートと列数での公称数量で、ロス余裕は加算しません。安価さだけでは仕入先適性は判断できません。
式と代入値
Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes
Supplier A
Area price: US$0.02196/ft²
Weight price: US$1.4515/lb
Running-foot price: US$0.05765/ft
Width: 31.50 inch; Repeat: 9.84 inch
Supplier B
Area price: US$0.02127/ft²
Weight price: US$1.4060/lb
Running-foot price: US$0.05584/ft
Width: 31.50 inch; Repeat: 9.84 inch
計算式をわかりやすく。
Build flexible packaging quote comparison from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.
この計算ツールの使い方
- 01
Choose the actual materials or components and record their quantities, prices and retained additions.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review each contribution, then compare the total at the same production quantity and cost boundary.
検算できる計算例
The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.
Supplier A offers 25,000 ft² at $0.015/ft² with $80 freight. Supplier B offers the same qualified coverage at $0.0145/ft² with $100 freight.
- Supplier A delivered
- US$455.00
- Supplier B delivered
- US$462.50
A: 25,000 × $0.015 + $80 = $455; B: 25,000 × $0.0145 + $100 = $462.50Both suppliers must meet the same specification. No currency conversion, tax treatment or supplier qualification is implied.
よくある質問
Which units should I use for flexible packaging quote comparison?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two flexible packaging quote comparison results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
結果を使用する前に、表示された式、単位、前提条件を確認してください。
計算方法・単位・材料の前提条件 ↗