ツール 25 / 136

Linear feet per lb Calculator — US Units

Linear feet per lb connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), film gsm (g/m²) ready before you start.

仕様を入力

g/m²

仕入先の実際の坪量または実測値がある場合は、それを使用してください。

入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

Linear feet per lb

23.25 ft/lb
Weight per foot0.0430 lb/ft

Linear ft/lb = 4,882.427636 ÷ (Width(in) ÷ 12 × GSM)

Web width: 31.496062992125985 inch; Film GSM: 80 g/m² → 23.25 ft/lb

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

Linear ft/lb = 4,882.427636 ÷ (Width(in) ÷ 12 × GSM)

The result answers a specific purchasing question: Work out linear feet per lb with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read linear feet per lb in ft/lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Web width (inch); Film GSM (g/m²). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review linear feet per lb and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter web width 31.50 inch, film gsm 80.00 g/m². The calculated linear feet per lb is 23.25 ft/lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

ウェブ幅
31.496063 inch
フィルム坪量
80 g/m²
Linear ft/lb = 4,882.427636 ÷ (Width(in) ÷ 12 × GSM)
Linear feet per lb23.25 ft/lb

よくある質問

Which units should I use for linear feet per lb?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two linear feet per lb results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗