ツール 15 / 136

Tooling Cost per 1,000 Packs Calculator — US Units

Tooling Cost per 1,000 Packs connects the figures on a US supplier quote with the quantity used by your packaging operation. Have total tooling cost (currency), expected lifetime production (units) ready before you start.

仕様を入力

USD

通貨の表示のみ。為替換算は行いません。

個
入力を変更すると結果も更新されます。保存を選ぶまでデータは保存されません。
リアルタイム計算

包装1,000個当たりの金型・版代

US$1.8000/1,000 packs
1個当たりの金型・版代US$0.00180/pack

入力した生涯生産数量がすべて生産される前提で配賦します。

1,000 包装の金型費 = 金型費 ÷ 寿命期間の生産数 × 1,000

Total tooling cost: 1800 USD; Expected lifetime production: 1000000 units → US$1.8000/1,000 packs

入力値に基づく計算です。仕様は仕入先に確認してください。

計算式をわかりやすく。

1,000 包装の金型費 = 金型費 ÷ 寿命期間の生産数 × 1,000

The result answers a specific purchasing question: Work out tooling cost per 1,000 packs with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read tooling per 1,000 packs in your selected currency/1,000 packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

この計算ツールの使い方

  1. 01

    Collect Total tooling cost (currency); Expected lifetime production (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review tooling per 1,000 packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

検算できる計算例

For this US purchasing example, enter total tooling cost US$1,800.00, expected lifetime production 1,000,000.00 units. The calculated tooling per 1,000 packs is US$1.8000/1,000 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

金型・版代合計
1,800 USD
寿命全体の予定生産数
1,000,000 個
Tooling/1,000 packs = Tooling cost ÷ Lifetime production units × 1,000
包装1,000個当たりの金型・版代US$1.8000/1,000 packs

よくある質問

Which units should I use for tooling cost per 1,000 packs?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two tooling cost per 1,000 packs results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record total tooling cost (currency), expected lifetime production (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

結果を使用する前に、表示された式、単位、前提条件を確認してください。

計算方法・単位・材料の前提条件 ↗