도구 120 / 136

Blister Material Cost per 1,000 Packs Calculator — US Units

Blister Material Cost per 1,000 Packs connects the figures on a US supplier quote with the quantity used by your packaging operation. Have forming web width (inch), forming machine pitch (inch), packs across (units) ready before you start.

사양 입력

개
g/m²
USD/lb
g/m²
USD/lb
%

단위 표시만 하며 통화 변환은 하지 않습니다.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

양품 포장 1,000개당 총재료 원가

US$10.53/1,000 packs
1,000개당 성형 재료 원가US$7.3684/1,000 packs
1,000개당 덮개 재료 원가US$3.1579/1,000 packs
1,000개당 총성형 재료량8.12 lb/1,000 packs
1,000개당 총덮개 재료량1.39 lb/1,000 packs

손실은 총투입량 중 손실되는 비율입니다. 총필요량 = 양품 산출량 ÷ (1 − 손실 백분율/100)입니다.

성형재와 덮개재는 각각 입력한 원단 배부량과 공통 폭 방향 포장 수를 사용합니다. 가공, 제품 충전 및 시험은 제외됩니다.

재료 및 구매 계산만 수행하며 의료 또는 의약품 품질 결론을 의미하지 않습니다.

Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)

Forming web width: 11.811023622047244 inch; Forming machine pitch: 3.937007874015748 inch; Packs across: 3 units; Forming web GSM: 350 g/m²; Forming material price/kg: 0.90718474 USD/lb; Lidding web width: 11.811023622047244 inch; Lidding pitch: 3.937007874015748 inch; Lidding GSM: 60 g/m²; Lidding material price/kg: 2.2679618500000003 USD/lb; Process loss on gross input: 5 % → US$10.53/1,000 packs

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)

The result answers a specific purchasing question: Work out blister material cost per 1,000 packs with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read total material cost per 1,000 good packs in your selected currency/1,000 packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Forming web width (inch); Forming machine pitch (inch); Packs across (units); Forming web GSM (g/m²); Forming material price/lb (currency/lb); Lidding web width (inch); Lidding pitch (inch); Lidding GSM (g/m²); Lidding material price/lb (currency/lb); Process loss on gross input (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review total material cost per 1,000 good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter forming web width 11.81 inch, forming machine pitch 3.94 inch, packs across 3.00 units, forming web gsm 350.00 g/m². The calculated total material cost per 1,000 good packs is US$10.53/1,000 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

성형 원단 폭
11.8110236 inch
성형기 피치
3.93700787 inch
폭 방향 포장 수
3 개
성형 원단 평량
350 g/m²
Forming material price/lb
0.90718474 USD/lb
덮개 원단 폭
11.8110236 inch
덮개 피치
3.93700787 inch
덮개 재료 평량
60 g/m²
Lidding material price/lb
2.26796185 USD/lb
총투입량 기준 공정 손실
5 %
Cost/1,000 = 1,000 ÷ (1 − Waste fraction) × Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × Web GSM × 0.0002048161436 × Price/lb)
양품 포장 1,000개당 총재료 원가US$10.53/1,000 packs

자주 묻는 질문

Which units should I use for blister material cost per 1,000 packs?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two blister material cost per 1,000 packs results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record forming web width (inch), forming machine pitch (inch), packs across (units), forming web gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗