도구 127 / 136

Boxes per Pallet Layer Calculator — US Units

Boxes per Pallet Layer connects the figures on a US supplier quote with the quantity used by your packaging operation. Have usable pallet length (inch), usable pallet width (inch), outside box length (inch) ready before you start.

사양 입력

inch
inch
inch
inch
입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

층당 상자 수

8.00 개
세로 방향 배치6.00 개
회전 배치8.00 개

동일한 방향만 적용하며 혼합 배치는 더 많은 상자를 넣을 수 있습니다.

유효 바닥 면적에서 차감하지 않았다면 돌출, 간격 또는 래핑 여유를 포함하지 않습니다.

적층 높이, 안정성, 압축 강도 또는 팔레트 정격 하중은 평가하지 않습니다.

단별 수량 = max(floor(L/l) × floor(W/w), floor(L/w) × floor(W/l))

Usable pallet length: 47.24409448818898 inch; Usable pallet width: 31.496062992125985 inch; Outside box length: 15.748031496062993 inch; Outside box width: 11.811023622047244 inch → 8.00 개

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

단별 수량 = max(floor(L/l) × floor(W/w), floor(L/w) × floor(W/l))

The result answers a specific purchasing question: Work out boxes per pallet layer with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read boxes per layer in units. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Usable pallet length (inch); Usable pallet width (inch); Outside box length (inch); Outside box width (inch). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review boxes per layer and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter usable pallet length 47.24 inch, usable pallet width 31.50 inch, outside box length 15.75 inch, outside box width 11.81 inch. The calculated boxes per layer is 8.00 units. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

팔레트 유효 길이
47.2440945 inch
팔레트 유효 폭
31.496063 inch
상자 외부 길이
15.7480315 inch
상자 외부 폭
11.8110236 inch
Layer count = max(floor(L/l) × floor(W/w), floor(L/w) × floor(W/l))
층당 상자 수8.00 개

자주 묻는 질문

Which units should I use for boxes per pallet layer?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two boxes per pallet layer results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record usable pallet length (inch), usable pallet width (inch), outside box length (inch), outside box width (inch) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗