도구 67 / 136

Corrugated Box Weight Calculator — US Units

Corrugated Box Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have actual blank width (inch), actual blank length (inch), actual board gsm (g/m²) ready before you start.

사양 입력

g/m²
%
입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

상자 판지 예상 중량

0.2205 lb/box
실제 직사각형 블랭크 면적2.15 ft²
타공 전 블랭크 질량0.2205 lb
지정 타공으로 제거된 재료0.00 lb

실제 블랭크 치수를 사용합니다. 완성 포장의 내부 또는 외부 치수만으로 정확한 칼선 블랭크를 정할 수 없습니다.

타공 비율은 이 블랭크에서 제거하는 재료이며 생산 수율 손실이 아닙니다. 접착제, 잉크 및 부속품은 실측 평량에 포함된 경우 외에는 제외됩니다.

Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)

Actual blank width: 19.68503937007874 inch; Actual blank length: 15.748031496062993 inch; Actual board GSM: 500 g/m²; Blank material removed by cutouts: 0 % → 0.2205 lb/box

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)

The result answers a specific purchasing question: Work out corrugated box weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated box board weight in lb/box. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Actual blank width (inch); Actual blank length (inch); Actual board GSM (g/m²); Blank material removed by cutouts (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review estimated box board weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter actual blank width 19.69 inch, actual blank length 15.75 inch, actual board gsm 500.00 g/m², blank material removed by cutouts 0.00 %. The calculated estimated box board weight is 0.2205 lb/box. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

실제 전개도 폭
19.6850394 inch
실제 전개도 길이
15.7480315 inch
실제 판지 평량
500 g/m²
절단으로 제거되는 전개도 재료
0 %
Retained board lb = Blank length(in) × Blank width(in) ÷ 144 × Board GSM × 0.0002048161436 × (1 − Removal fraction)
상자 판지 예상 중량0.2205 lb/box

자주 묻는 질문

Which units should I use for corrugated box weight?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two corrugated box weight results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record actual blank width (inch), actual blank length (inch), actual board gsm (g/m²), blank material removed by cutouts (%) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗