도구 14 / 136

Cost per 1,000 Packs Calculator — US Units

Cost per 1,000 Packs connects the figures on a US supplier quote with the quantity used by your packaging operation. Have web width (inch), print / pack repeat (inch), lanes across the web (lanes) ready before you start.

사양 입력

lanes
g/m²

공급업체의 실제 평량 또는 실측 평량이 있으면 사용하세요.

USD/lb

통화 표시만 변경합니다. 환율 환산은 하지 않습니다.

%

총투입량 대비 손실 비율입니다.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

양품 포장 1,000개당 재료 원가

US$25.26/1,000 packs
양품 포장당 재료 원가US$0.02526/pack
단위당 이론 면적1.08 ft²/pack
양품 단위당 총투입 면적1.13 ft²/pack
Film cost per ft²US$0.02230/ft²

손실률은 총재료 투입량 중 손실되는 비율입니다. 총필요량 = 순필요량 ÷ (1 − 손실률)입니다.

재료 원가만 포함하며 금형·판, 운송, 가공 인건비 및 부속품은 제외합니다.

Cost/1,000 good packs = Area/pack(ft²) × 1,000 ÷ (1 − Waste fraction) × Price/ft²

Web width: 31.496062992125985 inch; Print / pack repeat: 9.84251968503937 inch; Lanes across the web: 2 lanes; Film GSM: 80 g/m²; Film price on selected basis: 1.3607771100000001 USD/lb; Process waste: 5 % → US$25.26/1,000 packs

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Cost/1,000 good packs = Area/pack(ft²) × 1,000 ÷ (1 − Waste fraction) × Price/ft²

The result answers a specific purchasing question: Work out cost per 1,000 packs with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read material cost per 1,000 good packs in your selected currency/1,000 packs. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Web width (inch); Print / pack repeat (inch); Lanes across the web (lanes); Film GSM (g/m²); Film price on selected basis (currency/lb); Process waste (%). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review material cost per 1,000 good packs and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter web width 31.50 inch, print / pack repeat 9.84 inch, lanes across the web 2.00 lanes, film gsm 80.00 g/m². The calculated material cost per 1,000 good packs is US$25.26/1,000 packs. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

원단 폭
31.496063 inch
인쇄 / 포장 반복 길이
9.84251969 inch
원단 폭 방향의 열 수
2 lanes
필름 평량
80 g/m²
선택 기준의 필름 가격
1.36077711 USD/lb
공정 손실
5 %
Cost/1,000 good packs = Area/pack(ft²) × 1,000 ÷ (1 − Waste fraction) × Price/ft²
양품 포장 1,000개당 재료 원가US$25.26/1,000 packs

자주 묻는 질문

Which units should I use for cost per 1,000 packs?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two cost per 1,000 packs results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record web width (inch), print / pack repeat (inch), lanes across the web (lanes), film gsm (g/m²) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗