Film Density from GSM and Thickness Calculator — US Units
Film Density from GSM and Thickness connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film gsm (g/m²), film thickness (mil) ready before you start.
사양 입력
공급업체의 실제 평량 또는 실측 평량이 있으면 사용하세요.
필름 겉보기 밀도
다층 구조에서는 유효 평균값이며 개별 수지 등급을 식별하는 값은 아닙니다.
두께 측정 오차는 계산된 밀도에 직접 영향을 줍니다.
Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)
Film GSM: 16.68 g/m²; Film thickness: 0.47244094488188976 mil → 1.39 g/cm³입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out film density from gsm and thickness with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read apparent film density in g/cm³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Film GSM (g/m²); Film thickness (mil). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review apparent film density and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter film gsm 16.68 g/m², film thickness 0.4724 mil. The calculated apparent film density is 1.39 g/cm³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 필름 평량
- 16.68 g/m²
- 필름 두께
- 0.472440945 밀
Density(g/cm³) = GSM ÷ (Thickness(mil) × 25.4)자주 묻는 질문
Which units should I use for film density from gsm and thickness?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two film density from gsm and thickness results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record film gsm (g/m²), film thickness (mil) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗