mils to GSM Calculator — US Units
mils to GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Have film thickness (mil), material density (g/cm³) ready before you start.
사양 입력
대표 밀도입니다. 실제 밀도는 수지 등급과 배합에 따라 달라지므로 가능한 경우 공급업체 자료나 실측값을 사용하세요.
필름 예상 평량
Estimated using typical PET / BOPET density of 1.39 g/cm³. Actual density varies by resin grade and formulation.
라미네이트는 각 재료 층을 따로 계산하세요. 종이에는 일반적인 밀도값을 사용하지 마세요.
GSM = Thickness(mil) × 25.4 × Density(g/cm³)
Film thickness: 0.47244094488188976 mil; Material density: 1.39 g/cm³ → 16.68 g/m²입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.
계산식을 알기 쉽게.
The result answers a specific purchasing question: Work out mils to gsm with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated film gsm in g/m². Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
계산기 사용 방법
- 01
Collect Film thickness (mil); Material density (g/cm³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated film gsm and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
검증할 수 있는 계산
For this US purchasing example, enter film thickness 0.4724 mil, material density 1.39 g/cm³. The calculated estimated film gsm is 16.68 g/m². The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 필름 두께
- 0.472440945 밀
- 재료 밀도
- 1.39 g/cm³
GSM = Thickness(mil) × 25.4 × Density(g/cm³)자주 묻는 질문
Which units should I use for mils to gsm?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two mils to gsm results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record film thickness (mil), material density (g/cm³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.
계산 방법, 단위 및 재료 가정 ↗