도구 11 / 136

Flexible Packaging Quote Comparison Calculator — US Units

Flexible Packaging Quote Comparison connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

견적을 같은 기준으로 맞추세요.

가능하면 공급업체 실제 평량을 입력하세요. 모르는 치수는 비워 두면 어떤 환산에 추가 정보가 필요한지 표시됩니다.

QUOTATION A
형상 및 규격
주문 및 추가 비용
QUOTATION B
형상 및 규격
주문 및 추가 비용

수요 및 규격 허용 오차

연간 지출은 공통 수요를 충족하는 전체 출하 수량을 구매합니다. 운송비는 출하마다, 금형비는 첫해 한 번 반영하며 초과 재고도 포함합니다. 최소 주문량은 하한 조건이며 가정 출하량이 아닙니다. 공정 손실, 관세, 세금, 결제 조건 및 재고 보유비는 제외됩니다.

규격 허용 오차 편집

절대 허용 오차는 입력한 최댓값과 최솟값을 비교합니다. 열 수는 정확히 같아야 합니다. 구조 검사는 대소문자와 반복 공백만 무시하며 재료 동등성을 해석하지 않습니다.

최저 계산 원가 ≠ 동등 규격

입력 필드는 설정 허용 오차 내에서 일치하지만 동등 규격을 입증하지 않습니다. 차단성, 밀봉, 기계적 특성 및 승인은 여전히 검토해야 합니다.

공급업체별 재료 및 첫 출하 도착 원가입니다. 강조값은 해당 행의 최저 계산 원가입니다.
비교 기준Supplier AUSDSupplier BUSD
견적 기준lbft²
견적 가격US$1.4515/lbUS$0.02127/ft²
구조PET12 / PE60 + 접착제 2g/m²PET12 / PE60 + 접착제 2g/m²
평량73.88 g/m²73.88 g/m²
총두께2.83 mil2.83 mil
원단 폭31.50 inch31.50 inch
반복 길이 / 열 수9.84 inch / 29.84 inch / 2
최소 주문량1,102.31 lb1,102.31 lb
납품당 수량2,204.62 lb2,204.62 lb
운송비 / 출하US$250.00US$350.00
일회성 금형 비용US$600.00US$900.00
Material cost / lbUS$1.4515/lbUS$1.4060/lb최저 계산 원가
Material cost / ft²US$0.02196/ft²US$0.02127/ft²최저 계산 원가
Material cost / linear footUS$0.05765/ftUS$0.05584/ft최저 계산 원가
재료 원가 / 1,000개US$23.64US$22.90최저 계산 원가
First-shipment landed / lbUS$1.8370/lb최저 계산 원가US$1.9730/lb
First-shipment landed / ft²US$0.02780/ft²최저 계산 원가US$0.02985/ft²
출하 재료 소계US$3,200.00US$3,099.62
첫 출하 총 도착 원가US$4,050.00US$4,349.62
첫해 연간 지출US$28,200.00US$28,496.97
연간 전체 출하 횟수88
Annual purchased 1,000 units1,082.841,082.84

첫 출하 도착 원가는 입력한 금형비 전액을 포함하며 연간 지출에는 한 번만 반영합니다. 1,000개 가격은 입력 반복 길이와 열 수 기준 이론 수량이며 손실 여유가 없습니다. 낮은 원가만으로 공급업체 적합성을 입증할 수 없습니다.

공식 및 대입값

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Supplier A

Area price: US$0.02196/ft²

Weight price: US$1.4515/lb

Running-foot price: US$0.05765/ft

Width: 31.50 inch; Repeat: 9.84 inch

Supplier B

Area price: US$0.02127/ft²

Weight price: US$1.4060/lb

Running-foot price: US$0.05584/ft

Width: 31.50 inch; Repeat: 9.84 inch

계산식을 알기 쉽게.

Price/ft² = Price/lb × GSM × 0.0002048161436; Price/ft = Price/ft² × Width(in) ÷ 12; Price/1,000 packs = Price/ft × Repeat(in) ÷ 12 × 1,000 ÷ Lanes

Build flexible packaging quote comparison from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

계산기 사용 방법

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

검증할 수 있는 계산

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

Supplier A offers 25,000 ft² at $0.015/ft² with $80 freight. Supplier B offers the same qualified coverage at $0.0145/ft² with $100 freight.

Supplier A delivered
US$455.00
Supplier B delivered
US$462.50
A: 25,000 × $0.015 + $80 = $455; B: 25,000 × $0.0145 + $100 = $462.50
Difference for this purchaseUS$7.5000

Both suppliers must meet the same specification. No currency conversion, tax treatment or supplier qualification is implied.

자주 묻는 질문

Which units should I use for flexible packaging quote comparison?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two flexible packaging quote comparison results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗