도구 82 / 136

Labels per Roll Calculator — US Units

Labels per Roll connects the figures on a US supplier quote with the quantity used by your packaging operation. Have usable roll length (ft), label pitch including gap (inch), labels across (units) ready before you start.

사양 입력

개
입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

롤당 완전한 라벨 수

10,000.00 labels
완전한 행이 차지하는 길이3,280.84 ft
불완전 피치의 사용 불가 길이0.00 ft

선단과 후단을 제외한 유효 롤 길이를 사용하세요. 피치는 라벨과 기계 방향 간격을 포함합니다.

Labels = floor(Usable length(ft) × 12 ÷ Label pitch(in)) × Labels across

Usable roll length: 3280.839895013123 ft; Label pitch including gap: 3.937007874015748 inch; Labels across: 1 units → 10,000.00 labels

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

Labels = floor(Usable length(ft) × 12 ÷ Label pitch(in)) × Labels across

The result answers a specific purchasing question: Work out labels per roll with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read complete labels per roll in labels. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Usable roll length (ft); Label pitch including gap (inch); Labels across (units). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review complete labels per roll and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter usable roll length 3,280.84 ft, label pitch including gap 3.94 inch, labels across 1.00 units. The calculated complete labels per roll is 10,000.00 labels. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

사용 가능 롤 길이
3,280.8399 ft
간격 포함 라벨 피치
3.93700787 inch
폭 방향 라벨 수
1 개
Labels = floor(Usable length(ft) × 12 ÷ Label pitch(in)) × Labels across
롤당 완전한 라벨 수10,000.00 labels

자주 묻는 질문

Which units should I use for labels per roll?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two labels per roll results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record usable roll length (ft), label pitch including gap (inch), labels across (units) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗