도구 108 / 136

Tube Landed Cost Calculator — US Units

Tube Landed Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted tube body price (currency/unit), total material quote (currency), cap per tube (currency/unit) ready before you start.

사양 입력

USD/unit
USD/unit
USD/unit
개
USD
USD
USD
USD

단위 표시만 하며 통화 변환은 하지 않습니다.

입력값을 수정하면 결과가 갱신됩니다. 저장을 선택하기 전에는 저장되지 않습니다.
실시간 계산

튜브당 원가

US$0.2650/tube
튜브 1,000개당 원가US$265.00/1,000 tube
튜브당 운송비 배부액US$0.02500/개
단위당 견적 구성품 비용US$0.2400/개
단위당 전체 주문 고정비US$0.02500/개
주문 총 도착 원가US$2,650.00

견적 금액과 모든 비용은 선택한 통화를 사용하며 환율 변환하지 않습니다.

견적 금액에 운송비나 구성품이 이미 포함되어 있으면 다시 더하지 마세요. 관세는 금액으로 입력합니다.

튜브당 도착 원가 = 기본 가격 + 별도 캡 + 별도 장식 + 주문 고정 비용 ÷ 수량

Quoted tube body price: 0.2 USD/unit; Cap per tube: 0.04 USD/unit; Additional decoration per tube: 0 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD; Customs / duty amount: 0 USD; Other fixed order charges: 0 USD → US$0.2650/tube

입력한 값으로 계산했습니다. 공급업체에 사양을 확인하세요.

계산식을 알기 쉽게.

튜브당 도착 원가 = 기본 가격 + 별도 캡 + 별도 장식 + 주문 고정 비용 ÷ 수량

The result answers a specific purchasing question: Work out tube landed cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per tube in your selected currency/tube. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

계산기 사용 방법

  1. 01

    Collect Quoted tube body price (currency/unit); Total material quote (currency); Cap per tube (currency/unit); Additional decoration per tube (currency/unit); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency); Customs / duty amount (currency); Other fixed order charges (currency). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review cost per tube and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

검증할 수 있는 계산

For this US purchasing example, enter quoted tube body price US$0.2000/unit, cap per tube US$0.04000/unit, additional decoration per tube US$0.00000/unit, order quantity 10,000.00 units. The calculated cost per tube is US$0.2650/tube. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

튜브 몸체 견적 가격
0.2 USD/개
튜브당 캡 비용
0.04 USD/개
튜브당 추가 장식 비용
0 USD/개
주문 수량
10,000 개
이 주문의 운송비
250 USD
이 주문에 배분된 금형 비용
0 USD
관세 금액
0 USD
기타 주문 고정 비용
0 USD
Landed/tube = Base tube price + Separate cap + Separate decoration + Fixed order charges ÷ Quantity
튜브당 원가US$0.2650/tube

자주 묻는 질문

Which units should I use for tube landed cost?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two tube landed cost results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted tube body price (currency/unit), total material quote (currency), cap per tube (currency/unit), additional decoration per tube (currency/unit) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

결과를 사용하기 전에 표시된 공식, 단위 및 가정을 확인하세요.

계산 방법, 단위 및 재료 가정 ↗