Cost blister forming and lidding webs in square feet

Keep forming and lidding widths, basis weights and prices separate. Use full purchased web allocation per pack before applying retained-output yield.

발행 Nalyquo · ·

설명용 계산이며 독립 전문가 검토를 주장하지 않습니다. 이 업데이트는 게시 및 방법론 정보를 추가합니다.

방법 및 참조 범위편집 정책 및 수정

Set up the US purchasing comparison

Keep forming and lidding widths, basis weights and prices separate. Use full purchased web allocation per pack before applying retained-output yield.

Formula and worked US example

Cost/good blister = Σ(Web width(in) × Pitch(in) ÷ (144 × Packs across) × $/ft²) ÷ Yield

At a 12-inch width, 4-inch pitch and four packs across, each web allocates 0.083333 ft²/blister. If the two area prices total $0.024/ft², nominal material is $0.002/blister. With 5% loss, cost is about $2.1053 per thousand good blisters.

Checks before using the estimate

Retained part area omits the forming skeleton. Use the purchased web allocation and avoid counting the same skeleton loss twice.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

자주 묻는 질문

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Retained part area omits the forming skeleton. Use the purchased web allocation and avoid counting the same skeleton loss twice.