Film mils, gauge and GSM: separate thickness from mass

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

발행 Nalyquo · ·

설명용 계산이며 독립 전문가 검토를 주장하지 않습니다. 이 업데이트는 게시 및 방법론 정보를 추가합니다.

방법 및 참조 범위편집 정책 및 수정

Set up the US purchasing comparison

For each uniform film layer, multiply mil thickness by 25.4 and density in g/cm³. A plastic-film gauge number is 100 times mil thickness; this convention does not define metal or paper gauge.

Formula and worked US example

GSM = Thickness(mil) × 25.4 × Density(g/cm³)

A 2-mil layer at an illustrative 0.92 g/cm³ is 46.736 GSM. At the same 2 mil and 1.39 g/cm³, it is 70.612 GSM. Equal thickness therefore supplies different pounds over the same area.

Checks before using the estimate

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.

  • Use actual supplier prices in place of these independent illustrative dollar quotes. No exchange rate is implied.
  • Keep the same technical specification, accepted-output denominator and delivery boundary across alternatives.

자주 묻는 질문

Can I reproduce the US figures in a calculator?

Open a related US calculator below and enter the stated quantities with their matching unit prices. Intermediate values in this article may be rounded.

What should I verify before using this result?

Use measured complete-film GSM where available. A multilayer construction needs each layer and its retained additions rather than one generic resin density.