FERRAMENTA 48 / 136

4-Ply Laminate GSM Calculator — US Units

4-Ply Laminate GSM connects the figures on a US supplier quote with the quantity used by your packaging operation. Build the structure or component list from the supplied specification.

4 filmes. 3 interfaces adesivas.

Carregar exemplo

Densidade típica. A densidade real varia com o grau e a formulação da resina; utilize dados do fornecedor ou medidos quando disponíveis. A gramagem medida ou do fornecedor é geralmente mais fiável do que uma estimativa pela densidade. Para materiais personalizados, introduza uma densidade verificada. Não estime a gramagem do papel com uma densidade genérica.

FILM LAYER 01
16,68g/m²

Estimated using typical PET / BOPET density of 1,39 g/cm³.

FILM LAYER 02
24,30g/m²

Estimated using typical Folha de alumínio density of 2,70 g/cm³.

FILM LAYER 03
17,10g/m²

Estimated using typical PA6 / nylon density of 1,14 g/cm³.

FILM LAYER 04
55,20g/m²

Estimated using typical PE (genérico) density of 0,9200 g/cm³.

Adesivo, impressão e revestimentos

Introduza zero para excluir uma adição. Todas as gramagens são massa seca retida por metro quadrado. A espessura do adesivo, tinta e revestimento não é deduzida da gramagem.

Adhesive interface 1

Gramagem seca retida do revestimento

Adhesive interface 2

Gramagem seca retida do revestimento

Adhesive interface 3

Gramagem seca retida do revestimento

Tinta

Massa seca retida

Revestimento

Massa seca retida

Outro material retido

Massa seca retida

Gramagem total do laminado119,28g / m²
Camadas de filme
113,28 g/m²
Adesivo, tinta, revestimento e outros
6,00 g/m²
Rendimento do laminado
40,93 ft²/lb
Apenas espessura do filme
3,78 mil
Peso por 1.000 m²
262,97 lb
Contribuição de cada camada e adição para a massa
Camada ou adiçãoGramagem seca
1. PET / BOPET16,68
2. Folha de alumínio24,30
3. PA6 / nylon17,10
4. PE (genérico)55,20
Adhesive interface 12,00
Adhesive interface 22,00
Adhesive interface 32,00
Tinta · excluído0,00
Revestimento · excluído0,00
Outro material retido · excluído0,00
Total119,28

A espessura do filme exclui adesivo, tinta e revestimento. O rendimento é teórico, antes das perdas de processo. Esta estimativa inclui densidades típicas da biblioteca.

Fórmula e valores substituídos

Layer GSM = Thickness(mil) × 25.4 × Density(g/cm³). Total GSM includes dry retained additions.

Yield(ft²/lb) = 4,882.427636 ÷ Total GSM. Material $/ft² = GSM × 0.0002048161436 × Material $/lb.

PET / BOPET: 0,4724 mil × 25.4 × 1,39 = 16,68 g/m²

Folha de alumínio: 0,3543 mil × 25.4 × 2,70 = 24,30 g/m²

PA6 / nylon: 0,5906 mil × 25.4 × 1,14 = 17,10 g/m²

PE (genérico): 2,36 mil × 25.4 × 0,9200 = 55,20 g/m²

Total retained basis weight: 119,28 g/m²

Yield: 4,882.427636 ÷ 119,28 = 40,93 ft²/lb

A fórmula explicada.

4-ply GSM = 25.4 × Σ(Four mil thicknesses × Their densities) + Dry retained additions

Build 4-ply laminate gsm from the actual layer or component records rather than a generic material assumption. Enter dimensional specifications in the displayed US units and keep every price paired with its stated denominator. Review the layer contributions and the finished result together before comparing suppliers.

Como utilizar esta calculadora

  1. 01

    Choose the actual materials or components and record their quantities, prices and retained additions.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review each contribution, then compare the total at the same production quantity and cost boundary.

Um cálculo que pode verificar

The worked US scenario below keeps the supplied components, cost boundary and physical quantities explicit. Its dollar prices are illustrative, independent of the interactive example.

This independent 4-ply example has a 0.5-mil PET face at 1.39 g/cm³ and 3 PE layers at 1 mil and 0.92 g/cm³ each. Every interface adds 2 dry GSM of adhesive.

PET price
$2/lb
PE price
$1.25/lb
Wet adhesive
$2/lb · 40% solids
Total basis weight
93,76 g/m²
Coverage yield
52,08 ft²/lb
Material cost
US$0,03132/ft²
Layer GSM = mil × 25.4 × density; Yield(ft²/lb) = 4,882.427636 ÷ Total GSM

These are theoretical material figures. Converting loss, labor, energy and freight are excluded. Dry adhesive is retained mass; its purchased wet mass is divided by 0.40.

Perguntas frequentes

Which units should I use for 4-ply laminate gsm?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two 4-ply laminate gsm results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record the component structure and cost basis for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Verifique a fórmula, as unidades e os pressupostos apresentados antes de utilizar o resultado.

Método, unidades e pressupostos dos materiais ↗