Closure Landed Cost Calculator — US Units
Closure Landed Cost connects the figures on a US supplier quote with the quantity used by your packaging operation. Have quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units) ready before you start.
Ваши параметры
Только обозначение единицы. Без конвертации валют.
Стоимость крышки
Суммы предложения и все расходы используют выбранную валюту без валютной конвертации.
Не добавляйте доставку или компоненты повторно, если они уже включены в предложение. Пошлина вводится денежной суммой.
Стоимость укупорки с доставкой = Цена единицы + (Перевозка + Оснастка + Прочие фиксированные затраты) ÷ Количество заказа
Quoted closure / dispenser price: 0.2 USD/unit; Order quantity: 10000 units; Freight for this order: 250 USD; Tooling allocated to this order: 0 USD; Customs / duty amount: 0 USD; Other fixed order charges: 0 USD → US$0,2250/closureРассчитано по вашим данным. Подтвердите параметры у поставщика.
Понятное объяснение формулы.
The result answers a specific purchasing question: Work out closure landed cost with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read cost per closure in your selected currency/closure. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
Как пользоваться калькулятором
- 01
Collect Quoted closure / dispenser price (currency/unit); Total material quote (currency); Order quantity (units); Freight for this order (currency); Tooling allocated to this order (currency); Customs / duty amount (currency); Other fixed order charges (currency). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review cost per closure and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
Расчёт, который можно проверить
For this US purchasing example, enter quoted closure / dispenser price US$0.2000/unit, order quantity 10,000.00 units, freight for this order US$250.00, tooling allocated to this order US$0.00000. The calculated cost per closure is US$0.2250/closure. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- Цена крышки или дозатора по предложению
- 0,2 USD/шт.
- Объём заказа
- 10 000 шт.
- Доставка этого заказа
- 250 USD
- Оснастка, отнесённая на этот заказ
- 0 USD
- Сумма таможенных пошлин
- 0 USD
- Другие фиксированные расходы заказа
- 0 USD
Landed/closure = Quoted price/unit + (Freight + Tooling + Other fixed charges) ÷ Order quantityЧастые вопросы
Which units should I use for closure landed cost?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two closure landed cost results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record quoted closure / dispenser price (currency/unit), total material quote (currency), order quantity (units), freight for this order (currency) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
Перед использованием результата проверьте показанную формулу, единицы измерения и допущения.
Методика, единицы и допущения о материале ↗