TOOL 123 / 136

FIBC Bag Volume & Dimensions Calculator — US Units

FIBC Bag Volume & Dimensions connects the figures on a US supplier quote with the quantity used by your packaging operation. Have internal filled length (inch), internal filled width (inch), internal filling height (inch) ready before you start.

Your specifications

Results update as you edit. Nothing is saved until you choose to.
Live calculation

Theoretical internal volume

34.33 ft³
Theoretical internal volume in liters256.78 US gal
Required internal filling height47.24 inch

Rectangular internal filled geometry only. Bulging, settling, liners, seams and headspace can change usable volume.

This estimates volume and filling height, not fabric cutting dimensions or safe working load. Confirm the supplier specification separately.

Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12

Internal filled length: 35.43307086614173 inch; Internal filled width: 35.43307086614173 inch; Internal filling height: 47.24409448818898 inch → 34.33 ft³

Calculated from your inputs. Confirm specifications with your supplier.

The formula, made clear.

Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12

The result answers a specific purchasing question: Work out fibc bag volume & dimensions with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read theoretical internal volume in ft³. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.

How to use this calculator

  1. 01

    Collect Internal filled length (inch); Internal filled width (inch); Internal filling height (inch); Target product mass (lb); Product bulk density (lb/ft³). Leave optional unknown values blank rather than substituting zero.

  2. 02

    Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.

  3. 03

    Review theoretical internal volume and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.

A calculation you can check

For this US purchasing example, enter internal filled length 35.43 inch, internal filled width 35.43 inch, internal filling height 47.24 inch. The calculated theoretical internal volume is 34.33 ft³. The table lists the remaining inputs and results so the scenario can be checked or reproduced.

Internal filled length
35.4330709 inch
Internal filled width
35.4330709 inch
Internal filling height
47.2440945 inch
Volume(ft³) = Length(in) × Width(in) × Filling height(in) ÷ 1,728; Required height(in) = Payload(lb) ÷ Density(lb/ft³) ÷ Base area(ft²) × 12
Theoretical internal volume34.33 ft³

Frequently asked questions

Which units should I use for fibc bag volume & dimensions?

Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.

Can I compare two fibc bag volume & dimensions results directly?

Yes, when both runs use the same specification, purchasing boundary and included charges. Record internal filled length (inch), internal filled width (inch), internal filling height (inch), target product mass (lb) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.

Check the displayed formula, units and assumptions before using the result.

Method, units and material assumptions ↗