Core Weight Calculator — US Units
Core Weight connects the figures on a US supplier quote with the quantity used by your packaging operation. Have core outside diameter (inch), core inside diameter (inch), core width (inch) ready before you start.
您的规格参数
700 kg/m³只是纸板密度的示例估值。请输入卷芯实际密度;此值并非通用值。
估算纸芯重量
默认密度只是纸板的示例估值,并非通用规格。请输入实际密度,或使用卷芯实测重量。
假设为均匀空心圆柱体;不含堵头和端部配件。
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)
Core outside diameter: 3.543307086614173 inch; Core inside diameter: 2.9921259842519685 inch; Core width: 31.496062992125985 inch; Core material density: 43.699572403301225 lb/ft³ → 2.25 lb根据您输入的数据计算。请与供应商确认规格。
公式解释。
The result answers a specific purchasing question: Work out core weight with US purchasing units. Enter the actual specification and compare the result on a consistent order basis. Read estimated core weight in lb. Width and repeat measurements describe the actual purchased web or blank; a finished pack dimension is only interchangeable when the layout really uses that dimension. Keep input prices on the unit printed next to each price field. The US view converts the physical quantity and its price denominator together, so changing units preserves the calculated material or order value.
如何使用此计算器
- 01
Collect Core outside diameter (inch); Core inside diameter (inch); Core width (inch); Core material density (lb/ft³). Leave optional unknown values blank rather than substituting zero.
- 02
Use inches for short dimensions, feet for running length, square feet for coverage and pounds for mass. A US short ton is exactly 2,000 lb; US gallons are not Imperial gallons.
- 03
Review estimated core weight and the secondary outputs. Check the quote boundary, then repeat with the competing specification or order quantity.
可以核验的计算
For this US purchasing example, enter core outside diameter 3.54 inch, core inside diameter 2.99 inch, core width 31.50 inch, core material density 43.70 lb/ft³. The calculated estimated core weight is 2.25 lb. The table lists the remaining inputs and results so the scenario can be checked or reproduced.
- 卷芯外径
- 3.54330709 inch
- 卷芯内径
- 2.99212598 inch
- 卷芯宽度
- 31.496063 inch
- 卷芯材料密度
- 43.6995724 lb/ft³
Core lb = π ÷ 4 × ((OD(in) ÷ 12)² − (ID(in) ÷ 12)²) × Core length(in) ÷ 12 × Density(lb/ft³)常见问题
Which units should I use for core weight?
Use the units shown beside each input. Coverage is in ft², mass is in lb and short dimensions are in inches. GSM and g/cm³ remain explicit technical material properties. The matching Metric edition is linked above the calculator.
Can I compare two core weight results directly?
Yes, when both runs use the same specification, purchasing boundary and included charges. Record core outside diameter (inch), core inside diameter (inch), core width (inch), core material density (lb/ft³) for each run, then investigate any physical or commercial difference instead of treating the lower number alone as a supplier decision.
使用结果前,请核对显示的公式、单位和假设。
方法、单位和材料假设 ↗